Taiden hcs-8300, Installation And Operation Manual

Page: 177 / 255

164
6.2.3 Configuration and operation
When installation and connection are finished, and
prior to the meeting, HCS-8300MI Series 8 Channels
Audio Input Interface should be configured by front
panel menu operation.
In this section, we take HCS-8300MID/FS(D) as an
example to introduce its menu operation. The other
types of Audio Input Interface have the similar user
interfaces and one or more functions are not available.
A) Initialization
B) LCD initial interface operation
The initial user interface is determinated by the working
mode. For the configuration of the working mode
please refer to section 6.2.3.1 .
a. Simultaneous interpretation mode:

The first row displays the input channel numbers;

The second row displays the corresponding
language names. If a channel has an input signal,
its corresponding LED will change to red; if a
channel does not have an input signal, a “×” will be
displayed and its corresponding LED will go out;

The third row displays the dynamic level of the
input signals.
b. Mix audio mode:

The first row displays the input channel numbers;

The second row displays the dynamic level of the
corresponding input channels;

The third row displays the unit ID and the output
dynamic level of mix audio. Press the “EXIT”
button to “ON”/“OFF” the mix mode, when the
mode on, all the LED change to red. The default
status is “OFF” when power on each time.
c1. CobraTrans mode:

The first row displays the input channel numbers;

The second row displays the dynamic level of the
corresponding input channels;

The third row displays the CobraNet transmitting
port number.
c2. DanteTrans mode:

The first row displays the input channel numbers;

The second row displays the dynamic level of the
corresponding input channels.
The monitoring channel and the volume can be
adjusted at the front panel of the HCS-8300MI. The
configuration interface will be displayed on the LCD, as
shown in the following figure:
■
Select monitoring channel

The monitoring channel can be selected
Mode Channel
SI Mode channel 1-8
Mixer Mode
channel 1-8
mixer output
Cobratrans Mode
Dantetrans Mode
channel 1-8

Press the “MENU” button to setup audio input
channel, please refer to section 6.2.3.3 for detailed
operation.