Taiden hcs-8300, Installation And Operation Manual

Page: 101 / 255

88
After numbering and seat arrangement, file server can
send commands to Multimedia Congress Terminals to
show delegate's name on the LCD, so delegates can
find their seats conveniently. The interface of the
following figure is shown.
B) Speaking (without software)
Speaking mode is configured on the CMU (refer to
section 2.1.4 ).
A. “OPEN” mode

Active microphone number limitation (1/2/3/4)
NOT reached :
a. When the microphone On/Off button on the
front panel is pressed, the speaker can give
his/her speech;
b. The microphone will be deactivated when the
microphone On/Off button is pressed again.

Active microphone number limitation (1/2/3/4)
Reached :
a. When the microphone On/Off key is pressed,
the speaker can request to speak;
b. Press this key again to cancel request to
speak;
c. When an active microphone is turned off, the
first request microphone will be activated.
B. “OVERRIDE” mode

Active microphone number limitation (1/2/3/4)
NOT reached :
a. When the microphone On/Off button on the
front panel is pressed, the speaker can give
his/her speech;
b. The microphone will be deactivated when the
microphone On/Off button is pressed again.

Active microphone number limitation (1/2/3/4)
Reached :
If the delegate microphone On/Off key is pressed,
its microphone will be activated and the first
activated delegate microphone will be deactivated
at the same time to maintain the active
microphone number limitation. If the number of
active microphone (including chairman and VIP
unit) reaches 6, turning on another microphone will
switch off the delegate microphone turned on first.
C. “VOICE” mode

Active microphone number limitation (1/2/3/4)
Not reached :
a. When the delegate speaks into the microphone
at a short distance, the microphone will be
activated;
b. If the delegate does not speak for several
seconds, the microphone will be deactivated
automatically. The interval time can be adjusted
from the main unit (refer to section 2.1.4 );

Active microphone number limitation (1/2/3/4)
Reached :
All other microphones cannot be activated unless
one of the active microphones is turned off.
D. “APPLY” mode
a. Request to speak when the microphone On/Off
key is pressed (default 6 microphones at most).
The chairman unit can approve or reject his/her
speak;
b. When his/her request is approved, he/she can
speak and the last activated microphone will be
turn off at the same time.
Note:

When numbering, please number the multimedia
terminals one by one and do NOT press
“number” key of several terminals at the same
time.