Taiden hcs-8300, Installation And Operation Manual

Page: 51 / 255

38
a). Press the “

/

” button to select “Yes” or “No”;
b). Press the “MENU” button to save and return to
upper level menu.
23. Video Tracking Setting
Enable/disable video tracking function.
a). Press the “

/

” button to select “Yes” or “No”;

If “No” is selected, press the “MENU” button to
confirm and return to upper level menu;

If “Yes” is selected, press the “MENU” button to
go to step b);
b). Press the “

/

” button to select “FIFO” or “VIP
first”;

“ FIFO ” is selected: when current video tracking
microphone is deactivated, video camera will
turn to last active microphone automatically;

“ VIP First ” is selected: when current video
tracking microphone is deactivated, video
camera will turn to the first activated chairman
unit or VIP unit;

“ VOX ” is selected: when working under OPEN /
OVERRIDE / VOICE mode, video camera will
turn to the speaking microphone automatically;
c). Press the “MENU” button to save and return to
upper level menu.
24. Select Master/Slave Mode
If two CMU are installed in one system, they are set as
“Master Mode” and “Slave Mode” separately.
a). Press the “

/

” button to select “Master” or
“Slave”:

If “Master Mode” is selected, press the “MENU”
button to confirm and return to upper level menu;

If “Slave Mode” is selected, press the “MENU”
button to confirm and go to step b);
b). Press the “

/

” button to select “Enable” or
“Disable”;

If “Enable” is selected, slave CMU will backup
master CMU automatically during the meeting
process. If master CMU stops, slave CMU will
switch automatically to master mode and act as
master CMU;

If “Disable” is selected, slave CMU will backup
master CMU automatically in the meeting
process. If master CMU stops, slave CMU will
NOT switch to master mode;
c). Press the “MENU” button to save and return to
upper level menu.
25. Infrared MU Setting
a). Press the “

/

” button to select “On” or “Off”;

If “Off” is selected, press the “MENU” to save
and return to upper level menu;

If “On” is selected, press the “MENU” button to
go to step b);
b). Setup infrared MU IP address, the same as 2.1.4.1 .
26. Sampling Rate Setting
Select sample rate between 32 kHz and 48 kHz. If “48
kHz” sampling frequency is selected, the system
response frequency is 30 Hz - 20k Hz; if “32 kHz”
sampling frequency is selected, the system response
frequency is 30 Hz - 16 kHz.