Taiden hcs-8300, Installation And Operation Manual

Page: 49 / 255

36

If “No” is selected, press the “MENU” button to
confirm and return to upper level menu;

If “Yes” is selected, press the “MENU” button to
confirm and go to step b);
b). Press the “

/

” button to select priority mode
between “All Mute” and “All Off”;

“ All Mute ”: when chairman presses and holds
the “Priority” button, all active delegate
microphones (except VIP units) will mute
temporarily; when chairman releases the
“Priority” button, all temporarily muted
microphones will resume.

“ All Off ”: when chairman presses the “Priority”
button, all active delegate microphones (except
VIP units) will be deactivated.
c). Press the “MENU” button to save and return to
upper level menu.
16. Voice Mode Setting
“Voice Mode Setting” includes two submenus:
“Voice Sensitivity”
“Auto Off Time”

Sensitivity
Set microphone sensitivity under voice mode. Higher
sensitivity means a lower voice can activate the
microphone.
a). Press the “

/

” button to set microphone
sensitivity;
b). Press the “MENU” button to save and return to
upper level menu.

Auto Off Time
If the speaker does not speak for a certain time under
“Voice” mode, the microphone will be deactivated
automatically.
a). Press the “

/

” button to set auto off time (press
and hold the “

/

” button will adjust numeric value
quickly), range: 300 ms /600 ms /1 s - 15 s;
b). Press the “MENU” button to save and return to
upper level menu.
17. Timing speech setting
Set timing speech, range: 1-240 minutes.
a). Press the “

/

” button to set timing speech on/off:

If “Off” is selected, press the “MENU” button to
confirm and return to upper level menu;

If “On” is selected, press the “MENU” button to
confirm and go to step b);
b). Press the “

/

” button to switch between “Speech
time” and “Prompt time”;
c). Press “MENU” to select “Speech time ...(minutes)”
or “Before End ... Second(s) To Prompt”;
d). Press the “

/

” button to set time (press and hold
the “

/

” button will adjust numeric value quickly);
e). Press the “EXIT” button to save and return to upper
level menu.
18. Time Display Setting
Display or do not display time on the LCDs of the
contribution units.
a). Press the “

/

” button to select “Yes” or “No”;
b). Press the “MENU” button to save and return to
upper level menu.