Taiden hcs-8300, Installation And Operation Manual

Page: 75 / 255

62
3.2.3.2 Chairman unit
The chairman unit features all delegate unit functions,
additionally:
1. Priority

If priority mode on the main unit is configured as
“All mute”, all active delegate microphones (except
VIP units) will be muted temporarily when this key
is pressed and they will restore when the key is
released;

If configured as “All off”, all active delegate
microphones (except VIP units) will be turned off
and the request-to-speak list will be purged (in
“Open” mode and “Apply” mode) when the key is
pressed.
2. Speaking

If the active microphone capacity is not full, the
chairman can activate his/her microphone normally,
the operation is the same as for the delegate unit.

If the active microphone capacity is full, the
chairman cannot activate his/her microphone. But
he/she can use the “Priority” key to “All mute” or
“All off” other delegate microphones and give
his/her speech.
3. Controlling delegate unit
A. Approve delegate unit’s request to speak
Without PC and under “Apply” mode, when a delegate
requests to speak, indicating light of the chairman unit
will blink:

For HCS-8313C, press button “1” to approve
delegate's request to speak, press button “5” to
reject delegate's request to speak;

For HCS-8315C, the microphone indicating light
of HCS-8315C blinks, press microphone on/off
button to approve delegate's request to speak,
press “priority” button to reject delegate's request
to speak;

At most 6 microphones (default) can request at
the same time. When a request is approved, the
last activated microphone will be turn off at the
same time.
B. Turn off or mute delegate microphone
Chairman can use the “Priority” key to execute “All
mute” or “All off” operation.
4. Voting (HCS-8315C does not have this function)
HCS-8313C chairman unit cannot originate voting
without a PC:

When controlled by application software,
nominative or ballot voting are available;

“First key-press mode” or “Last key-press mode”
are available;

Voting can be controlled operator, voting operation
of chairman unit and delegate unit are identical.
Voting also can be controlled by chairman unit.
“Start voting” indicating light on chairman unit will
blink. Voting starts once the chairman pressed
“Start voting” key.