Taiden hcs-8300, Installation And Operation Manual

Page: 118 / 255

105

Restart Sign-in: clear current sign-in result and
restart sign-in;

Stop Sign-in: stop sign-in;

Sign-in Result: display sign-in result;
d. Select proposal:

Click “Proposal” to browse all proposals in the
current meeting (red coclor stands that the
proposal has signed in), and click to select a
proposal from a proposal list;

Proposal controlled by the chairman: click the
“Start Voting” button, the chairman unit LCD shows
the following figure; proposal controlled by the
operator, click the “Start Voting” button to go to
step e.
e. When voting started, voting control unit displays the
following figure;
f. Click the “End” button to end voting, and voting result
will be displayed on LCD of all congress terminals in
three different ways (numeric, bar, pie).

Start Vote: start voting, when DCS server is
modifying meeting data, cannot start voting;

Continue: if some delegates did not vote when
voting finished, click the “Continue” button to
resume voting. “You have voted.” will be displayed
to those delegates who have already voted. In case
of “Last key-press mode” voting, delegates who did
already vote can vote again. Under IC card sign-in
mode, PIN code sign-in mode and Finger print
sign-in mode, the “Continue” function is unavailable,
when the voting is controlled by the chairman, the
“Continue” function is unavailable too;

Display Result: display voting result on the LCD
of every congress terminal and on large screen(s)
in the meeting room (with dual-head VGA adaptor
equipped);

Name List: display name list on the LCD of every
congress terminal and on large screen(s) in the
meeting room for open mode proposal (with
dual-head VGA adaptor equipped).
3. Sharing
Click the “Sharing” icon to go to desktop sharing
interface on control unit.
When a multimedia terminal is requesting desktop