Taiden hcs-8300, Installation And Operation Manual

Page: 54 / 255

41

Press the “

/

” button to move the cursor;

Press the “MENU” button to modify the
character;

Press the “

” button to clear all the characters
after the cursor;

press the “

” button to select the new character,
the available characters are A~Z, a~z, 0~9,
space and !
＂
^ * _ + = - ( ) { } [ ] < > : ; / ?.

Press the “MENU” button to save at each
character;
c). After finished name setting, press the “EXIT” button
to return, the LCD of the main unit will display
“Need Restart To Be Effective”;
d). Press any button to return to the main menu.
37. Mic. LED Setting
Control the illuminated ring (green) of the stem
microphone On/Off.
a). Press the “

/

” button to select “On” or “Off”;

If “ On ” is selected, the green illuminated ring will
indicate the applying status;

If “ Off ” is selected, the green illuminated ring
gives no indication;
b). Press the “MENU” button to save and go to step c).
c). Press the “

/

” button to select “On” or “Off”;

If “ On ” is selected, the green illuminated ring will
blink when the unit is the first in the request list;

If “ Off ” is selected, the green illuminated ring will
keep on;
d). Press the “MENU” button to save and return to the
upper level menu.
38. Touch Key Beep Setting
Enable/disable touch key beep for HCS-4338/50 series
congress unit. Please hear the beep through earphone.
a). Press the “

/

” button to select “On” or “Off”;
b). Press the “MENU” button to save and return to the
upper level menu.
39. Headphone Mute Speaker
Set the work mode between loudspeaker and
headphone.
a). Press the “

/

” button to select “Yes” or “No”;

If select “ Yes ”, the loudspeaker was muted when
plugged headphone;

If select “ No ”, the loudspeaker and the
headphone can work at the same time, the
loudspeaker sends out the floor channel only
and the headphone sends out the floor channel
and SI channels;
b). Press the “MENU” button to save and return to the
upper level menu.
40. Floor Mode Setting
a). Press the “

/

” button to select floor mode;

Normal Mode: the signal on LineIn1 and
LineIn2 of the CMU are added to the floor signal,
see figure 2.1.10;

Insert Mode: the signal on LineIn2 of the CMU
is used as floor signal, see figure 2.1.11.
LineIn2 of the CMU is used to add signal from
Note:

The step c) is available when the step a) selects
“On”.
Note:

For congress unit with two channel selectors,
the loudspeaker was muted automatically
when plugged two headphones even if select
“ No ”.