Description:
Displays the control word for the two wire control/three wire control.
The control signals are dependent on the wire control set in p0015 and the signal states at the digital inputs.
Bit field:
Bit
Signal name
1 signal
0 signal
FP
00
ON
Yes
No
-
01
Reversing
Yes
No
-
02
ON inverted
Yes
No
-
03
Reversing inverted
Yes
No
-
Dependency:
See also: p0015, p3330, p3331, p3332, p3334
p3334
2/3 wire control selection / 2/3 wire select
Access level: 4
Calculated: -
Data type: Integer16
Can be changed: T, U
Scaling: -
Dynamic index: -
Unit group: -
Unit selection: -
Function diagram: 2272, 2273
Min:
0
Max:
4
Factory setting:
0
Description:
Sets the two wire control/three wire control.
Value:
0:
No wire control
1:
Two wire control clockwise/counterclockwise 1
2:
Two wire control clockwise/counterclockwise 2
3:
Three wire control enable clockwise/counterclockwise
4:
Three wire control enable ON/reversing
Dependency:
See also: p0015, p3330, p3331, p3332, r3333
Note
This value depends on the wire control set in p0015.
p3340[0...n]
BI: Limit switch start / Lim switch start
Access level: 3
Calculated: -
Data type: Unsigned32 / Binary
Can be changed: T
Scaling: -
Dynamic index: CDS, p0170
Unit group: -
Unit selection: -
Function diagram: -
Min:
-
Max:
-
Factory setting:
0
Description:
Sets the signal source for the start of motion dependent on the sign of the setpoint.
Dependency:
See also: p3342, p3343, r3344
See also: A07352
p3342[0...n]
BI: Limit switch plus / Lim switch plus
Access level: 3
Calculated: -
Data type: Unsigned32 / Binary
Can be changed: T
Scaling: -
Dynamic index: CDS, p0170
Unit group: -
Unit selection: -
Function diagram: -
Min:
-
Max:
-
Factory setting:
1
Description:
Sets the signal source for the limit switch plus.
BI: p3342 = 1-signal:
Limit switch is inactive.
BI: p3342 = 0 signal:
Limit switch is active.
Dependency:
See also: p3340, p3343, r3344
Parameters
7.2 Parameter list
SINAMICS G120X converter
838
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
