Principle when connecting BICO blocks using BICO technology
When interconnecting the signal, the following principle applies: Where does the signal come
from?
An interconnection between two BICO blocks consists of a connector or a binector and a BICO
parameter. The input of a block must be assigned the output of a different block: In the BICO
parameters, enter the parameter numbers of the connector/binector that should supply its
output signal to the BICO parameter.
How much care is required when you change the signal interconnection?
Note which changes you make. A subsequent analysis of the set signal interconnections is
possible only by evaluating the parameter list.
Where can you find additional information?
● All the binectors and connectors are located in the Parameter list.
● The function diagrams provide a complete overview of the factory setting for the signal
interconnections and the setting options.
Advanced commissioning
6.12 Explanations of the function diagrams
SINAMICS G120X converter
466
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
