00
Extend speed setpoint selected
1
0
-
01
Frost or condensation executing
1
0
-
03
Deragging executing
1
0
-
04
Pipe filling executing
1
0
-
05
Total executing
1
0
-
06
Normal executing
1
0
-
16
Ramp up status
1
0
-
17
Ramp down status
1
0
-
18
Target setpoint reached flag
1
0
-
r29641
CO: Extented setpoint channel setpoint output / Setp output
Access level: 3
Calculated: -
Data type: FloatingPoint32
Can be changed: -
Scaling: p2000
Dynamic index: -
Unit group: 3_1
Unit selection: p0505
Function diagram: -
Min:
- [rpm]
Max:
- [rpm]
Factory setting:
- [rpm]
Description:
Displays the actual output of the extended setpoint channel setpoint.
p29642
BI: Ramp-function generator, accept setpoint / Total setp sel
Access level: 3
Calculated: -
Data type: Unsigned32 / Binary
Can be changed: T
Scaling: -
Dynamic index: -
Unit group: -
Unit selection: -
Function diagram: -
Min:
-
Max:
-
Factory setting:
0
Description:
Sets the signal source for accepting the setpoint of the ramp-function generator.
p29643
CI: Ramp-function generator setpoint input / Total Setpoint
Access level: 3
Calculated: -
Data type: Unsigned32 /
FloatingPoint32
Can be changed: T
Scaling: p2000
Dynamic index: -
Unit group: -
Unit selection: -
Function diagram: -
Min:
-
Max:
-
Factory setting:
0
Description:
Sets the signal source for inputting the setpoint of the ramp-function generator.
p29650[0...n]
DI selection for ON/OFF2 / DI sel ON/OFF2
Access level: 3
Calculated: -
Data type: Integer16
Can be changed: T
Scaling: -
Dynamic index: CDS, p0170
Unit group: -
Unit selection: -
Function diagram: -
Min:
-1
Max:
5
Factory setting:
0
Description:
Defines the DI selection for ON/OFF2. After setting, configuration will be done internally(Except DP/PN variants),
p0840[0...n] = r29659.0
p0844[0...n] = r29659.1
p29652[0...n] = 722.n
You can also configure p29651[0...n] and p29652[0...n] after setting p29650[0...n].
Similar to p0840[0...n] and p0844[0...n], p29651[0...n] and p29652[0...n] are for ON/OFF1 input and OFF2 input
respectively.
Value:
-1:
NONE
Parameters
7.2 Parameter list
SINAMICS G120X converter
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
931