Omron SYSMAC CJ1W-SCU21-V1, Operation Manual

Page: 684 / 781

655
3Z4L Laser Micrometer Protocol Appendix N
Memory Switch Set 2 (3000-series, High-speed Type)
(Sequence No. 422 (Hex 01A6))
This sequence sets memory switches.
Send Data Word Allocation (3rd Operand of PMCR(260))
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
Note Memory switches cannot be set when DIP switch SW3, pin 5 of the Laser Micrometer is not turned ON.
Simple AVG Times Set (3000-series, High-speed Type)
(Sequence No. 423 (Hex 01A7))
This sequence uses the simple average as the averaging method and sets the averaging times per measure-
ment interval 4.
Send Data Word Allocation (3rd Operand of PMCR(260))
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
Note This sequence cannot be used when DIP switch SW3, pin 5 of the Laser Micrometer is not turned ON.
Offset Contents (data format) Data
+0 Number of send data words
(4 digits Hex) 0003 (fixed)
+1 w (1 digit BCD)
0: Work automatic detection is not performed
1: Work automatic detection is performed
Diameter detection method (1 scan)
2: Work automatic detection is performed
Diameter detection method (8 scan)
3: Work automatic detection is performed
Position detection method (1 scan)
x (1 digit BCD) For expansion
0 (fixed)
y (1 digit BCD) For expansion
0 (fixed)
z (1 digit BCD) For expansion
0 (fixed)
+2 v (1 digit BCD) *0: Error data exclusion function is not used
1: Error data exclusion function is used
Note Settings marked with asterisks are required for this protocol.
Offset Contents (data format) Data
+0 Number of send data words
(4 digits Hex) 0002 (fixed)
+1 Number of averaging times
(4 digits BCD) 1 to 2048
First word of send
data Number of send data words
+0
+1
+2
W
(Undefined)
X Y Z
V
First word of send
data +0
+1
Number of averaging times
Number of send data words