![background image](http://html1.mh-extra.com/html/omron/sysmac-cj1w-scu21-v1/sysmac-cj1w-scu21-v1_operation-manual_743586116.webp)
87
I/O Memory Allocations
Section 2-3
No-protocol Mode Bits
Serial Communications
Units (CS/CJ Series)
Port 1 and Port 2 Port Settings Change Bits
These bits can be turned ON from the program using the OUT or other
instructions to change communications settings and restart the Serial Com-
munications Unit ports. When changing the settings and restarting the port
have been completed, the bit will automatically be turned OFF. The port 1 or
port 2 Port Settings Change Bits and Restart Bits are allocated in the Auxiliary
Area according to the unit number as shown below.
Note
These bits are used both to change the port settings and to restart the port at
the same time. One of these bits can be turned ON to restart a port without
changing the port settings in the Setup Area allocated in the DM Area. The
STUP(237) instruction can also be used to just restart a communications port
by executing STUP(237) with the same port settings as the ones already
being used.
n = A620 + unit number
Boards (CS Series only)
Contents
Port 1
Port 2
Word
Bit
Word
Bit
A356
07
A356
15
Reception Overflow Flag
1: Board/Unit has received the specified
number of bytes or more
0: Board/Unit has not received the speci-
fied number of bytes or more
06
14
Reception Completed Flag
1: Reception completed; 0: No reception
or reception in progress
05
13
Send Ready Flag
1: Send enabled; 0: Send disabled
00 to 04
08 to 12
Reserved
A357
00 to 15
A358
00 to 15
Receive counter (number of receive data
bytes)
The number of bytes of received data
between 0 and 256 bytes is indicated
using 0000 to 0100 hex.
Words
Bit
Contents
n
03 to 15
Reserved
02
1: Port 2 Settings Change Bit
01
1: Port 1 Settings Change Bit
00
Reserved
Unit
Port 1 Settings Change Bit
Port 2 Settings Change Bit
Unit No. 0
A62001
A62002
Unit No. 1
A62101
A62102
Unit No. 2
A62201
A62202
Unit No. 3
A62301
A62302
Unit No. 4
A62401
A62402
Unit No. 5
A62501
A62502
Unit No. 6
A62601
A62602
Unit No. 7
A62701
A62702
Unit No. 8
A62801
A62802
Unit No. 9
A62901
A62902
Summary of Contents for SYSMAC CJ1W-SCU21-V1
