Omron NJ501-4300, Manual

Page: 31 / 336

29
Regulations and Standards
NJ-series NJ Robotics CPU Unit User’s Manual (W539)
This product complies with the different shipbuilding standards. Applicability to the shipbuilding
standards is based on certain usage conditions. It may not be possible to use the product in some
locations. Contact your OMRON representative before attempting to use a Controller on a ship.
• The NJ-series Controller must be installed within a control panel.
• Gaps in the door to the control panel must be completely filled or covered with gaskets or other mate-
rial.
• The following noise filter must be connected to the power supply line.
The NJ501-4300/-4310/-4320/-4400/-4500 Controllers do not conform to laws and regulations relating
to the safety of industrial robot application.
When you use the NJ501-4300/-4310/-4320/-4400/-4500 Controllers in robot systems that uses indus-
trial robots, be sure to verify the conformance to laws and regulations relating to the safety of industrial
robot application. Take measures to ensure safety as required.
This product incorporates certain third party software. The license and copyright information associated
with this software is given in the web pages relating to the NJ501-1300/-1400/-1500 Controllers at
http://www.fa.omron.co.jp/nj_info_e/.
Conformance to Shipbuilding Standards
Usage Conditions for NK and LR Shipbuilding Standards
Name Manufacturer Model
Noise Filter Cosel Co., Ltd. TAH-06-683
Using Controllers in Robot Systems
Software Licenses and Copyrights