![background image](http://html1.mh-extra.com/html/omron/nj501-4300/nj501-4300_manual_742408030.webp)
Regulations and Standards
28
NJ-series NJ Robotics CPU Unit User’s Manual (W539)
Regulations and Standards
If you export (or provide a non-resident with) this product or a part of this product that falls under the
category of goods (or technologies) specified by the Foreign Exchange and Foreign Trade Control Law
as those which require permission or approval for export, you must obtain permission or approval (or
service transaction permission) pursuant to the law.
• EMC Directives
• Low Voltage Directive
EMC Directives
OMRON devices that comply with EC Directives also conform to the related EMC standards so that
they can be more easily built into other devices or the overall machine. The actual products have
been checked for conformity to EMC standards.
*1
Whether the products conform to the standards in the system used by the customer, however, must
be checked by the customer. EMC-related performance of the OMRON devices that comply with EC
Directives will vary depending on the configuration, wiring, and other conditions of the equipment or
control panel on which the OMRON devices are installed. The customer must, therefore, perform
the final check to confirm that devices and the overall machine conform to EMC standards.
*1. Applicable EMC (Electromagnetic Compatibility) standards are as follows: EN 61131-2 and EN 61000-6-2 for EMS
(Electromagnetic Susceptibility), and EN 61131-2 and EN 61000-6-4 for EMI (Electromagnetic Interference).
EN 61000-6-4 (Radiated emission) is conformed based on 10-m regulations.
Low Voltage Directive
Devices operating at voltages of 50 to 1,000 VAC and 75 to 1,500 VDC must meet the required
safety standards. The applicable directive is EN 61131-2.
Conformance to EC Directives
The NJ/NX-series Controllers comply with EC Directives. To ensure that the machine or device in
which the NJ/NX-series Controller is used complies with EC Directives, the Controller must be
installed as follows:
• The NJ/NX-series Controller must be installed within a control panel.
• You must use reinforced insulation or double insulation for the DC power supplies connected to
DC Power Supply Units and I/O Units.
• NJ/NX-series Controllers that comply with EC Directives also conform to the Common Emission
Standard (EN 61000-6-4). Radiated emission characteristics (10-m regulations) may vary
depending on the configuration of the control panel used, other devices connected, wiring, and
other conditions.
You must therefore confirm that the overall machine or equipment complies with EC Directives.
Using Product Outside Japan
Conformance to EC Directives
Applicable Directives
Concepts
Summary of Contents for NJ501-4300
