Omron CP1H-CPU - 05-2006, Operation Manual

Page: 363 / 669

332
Serial Communications
Section 6-1
6-1 Serial Communications
6-1-1 Overview
The CP1H CPU Units support the following serial communications functions.
Protocol Connected devices Description Serial
port 1
Serial
port 2
No-protocol Standard devices supporting serial communications Communicates with standard
devices with an RS-232C or
RS-422A/485 port without a
command–response format.
Instead the TXD(236) and
RXD(235) instructions are exe-
cuted from the program to
transmit data from the trans-
mission port or read data in the
reception port. The frame
headers and end codes can be
specified. OK OK
Serial gate-
way (to
CompoWay/
F or Mod-
bus-RTU) OMRON components supporting CompoWay/F or Mod-
bus-RTU slave devices Converts received FINS com-
mands into CompoWay/F or
Modbus-RTU commands and
transfers them on the serial
communications path. OK OK
Serial PLC
Link CP1H or CJ1M CPU Units Up to ten words per Unit can
be shared by up to nine CPU
Units, including one Polling
Unit and eight Polled Units.
An RS-422A/485 Option
Boards (CP1W-CIF11) are
used to communicate via RS-
422A/485, or RS-232C Option
Boards (CP1W-CIF01) can be
used to communicate between
two CPU Units via an RS-232C
connection.
CJ1M CPU Units can also be
included in Serial PLC Links,
and the Serial PLC Links can
also include PTs as Polled
Units via 1:N NT Links.
Note Serial PLC Links can be
created on serial port 1
or serial port 2, but not
on both ports at the
same time.
OK OK
CP1H CPU Unit
Standard device with
serial communications
RS-232C or RS-422A/485
CP1H CPU Unit
RS-485 (CompoWay/F or Modbus-RTU)
OMRON CompoWay/F-compliant components
or Modbus-RUT slave devices
CP1H CPU Unit
Polling Unit
RS-422A/485 Option Board
RS-422A/485
Shared data
CP1H CPU Unit
Polled Unit
CP1H CPU Unit
Polled Unit