Chapter 18
Troubleshooting
255
Other
Information
18.11
Warning Message List
Displayed information
Description
Action
NO MEDIA
Media is not connected.
Recording media is not connected. Connect recording
media.
MEDIA HAS A PROBLEM.
Writing to the recording media failed.
Check the setting of the destination to save images,
and select recording media having sufficient space.
When the recording media approaches the end of life,
replace it with new recording media.
OUT OF MEDIA SPACE
The recording media does not have
free space needed for saving images.
Replace the recording media, or delete unnecessary
files from the recording media and perform capture
operation again.
Cannot be saved.
(MEDIA LOCKED)
Because the protection switch of the
recording media is on (write inhibit), the
file cannot be written.
Set the protection switch of the recording media to off.
MEDIA ERROR
Unsupported media is connected.
Replace the media with another media the DS-L3
supports.
Cannot be deleted.
(MEDIA LOCKED)
Because the protection switch of the
recording media is on (write inhibit), the
file or folder cannot be deleted, or the
media cannot be formatted.
Set the protection switch of the recording media to off.
Cannot be deleted.
(MEDIA LOCKED)
Because the attribute (property) of the
folder or file is “Read only”, they cannot
be deleted.
Connect the recording media to the PC, and change
the file or folder to a writable state (clear the checkbox
for “Read only” of the attribute (property)).
FTP HAS A PROBLEM
Images cannot be recorded in the FTP
server.
Check the network settings. Before recording images,
perform a PING test and login test to check that you
can successfully connect to the network.
The printer is not connected.
Connect the printer.
NO PRINTER
The power of the printer is off.
Turn on the printer.
PRINTING FAILED.
For some reason, the print process
could not be completed.
Check whether or not the printer runs out of paper or
ink.
DESTINATIN NOT SPECIFIED
The output destination at the time of
capture is not specified. Or, the setting
of the output destination is invalid.
Check the setting of the operating allocation at the
time of capture, and select the output destination
according to the current DS-L3 state.
FILE ALREADY EXISTS.
When trying to save an image, a file or
folder with the same name has been
found on the recording media.
Set the automatic creation of the name of a folder or
file, or change the destination folder to save the folder
or file to save it.
FILE READING ERROR
For some reason, the specified file
could not be refreshed.
Specify files supported by the system.
FILE JPEG ERROR
For some reason, the JPEG file could
not be expanded (refreshed).
The JPEG file may be corrupted.
When this error occurs for another captured image,
replace the recording media.
WHITE BALANCE FAILED.
The white balance could not be
obtained correctly.
Prepare a uniform subject and set the white balance
again.
SD CALCULATION FAILED.
The metering of shading failed.
Prepare a uniform subject and meter shading again.
CAMERA MENU DISABLED
Because startup processing is in
progress, the menu of the camera
control window cannot be operated.
Operate the menu after the DS-L3 completely starts
up.
NO CAMERA
The DS camera head is connected
incorrectly.
Turn off the DS-L3, attach the DS camera head
correctly, and then turn on the power again.
CANNOT GET IP FROM DHCP
An IP address could not be acquired
from a DHCP server.
If a DHCP server exists on the network, check the
connection status of the network.
If no DHCP server exists, set a DHCP server not to
be used in the [SETUP MENU : NETWORK] window.
Summary of Contents for DS-L3
Page 2: ......
