Nikon DS-L3 Instructions Manual Download Page 113

Page: 113 / 286

Chapter 8

Capturing Images with Advanced Setting Menu

Photogr

hin
g and

Playi

ng Image

(3) Registering SD (shading) adjustment value

Follow the steps below to register a user-defined shading adjustment value.

Find an evenly colored subject, and set it so as to be

viewed across the entire screen.

Make sure that there is no obstacle to block the light.

Display the [CAM MENU: NR/SD/SET] screen.

Press the [SD SET] button.

The [SD SET] submenu is displayed.

Press the [MEAS START] button.

The shading is measured, and a blue frame shows on the
button when it is completed.
Note: The measurement data may not be obtained

properly when the shading is large.

Press a desired button from among [USD1] to [USD7]

for specifying the registration number.

Pressing a button shows a blue frame on the button,
indicating that the [OK] button can now be pressed.
Note: The step 4 and 5 can be interchanged.

Press the [OK] button to register the user-defined

shading adjustment value.

The [SD SET] submenu closes.
Note: When you have registered a user-defined shading

adjustment value and closed the [SD SET] submenu,
the [SD] button shows the registered user-defined
shading adjustment value being selected.

Registration of user-defined shading adjustment values

Shading disabled with ROI-L/S or C.SCAN mode

If the image mode is set to [ROI-L], [ROI-S], or [C.SCAN], shading adjustment is disabled, and the [SD] and [SD
SET] buttons will be unavailable.

Specify the registration number.

Find an evenly colored subject,
and set it so as to be viewed
across the entire screen.

Summary of Contents for DS-L3































































































































































































































































































Search results

Summary of Contents for DS-L3

Reviews:

Related manuals for DS-L3

Brands by name

Popular brands

Nikon DS-L3, Instructions Manual

Search results

Summary of Contents for DS-L3

Reviews:

Related manuals for DS-L3

Brands by name

Popular brands