Chapter 4
Preparing for Use
27
Please
Read Firs
t
4.3.3
Connecting a USB Memory
Up to three USB memories can be connected to the system at the same time as a medium for recording and playing back
images. You can use any FAT-formatted storage device compatible with USB 2.0 as well as USB memory.
Do not remove the USB memory stick when it is accessed
If you insert or remove the USB memory stick to or from the DS-L3 when the power is on, do not remove the USB memory
stick or switch off the DS-L3 while the USB memory access lamp is on (to indicate that the card is being accessed for
initialization, data storage or deletion, or data retrieval). Doing so may erase the data or cause the failure of the product.
(1) Connecting and removing a USB memory
Connect a commercially available USB memory stick to the USB
(H) connector on the right side of DS-L3.
DS-L3 has two USB (H) connectors, both of which can be
connected at the same time. To connect three USB memory
sticks, use a commercially available USB hub.
Note: DS-L3 recognizes up to three USB memory sticks.
When you remove a USB memory, make sure access to the
memory (for saving and playing back an image) is complete (USB
memory access lamp is off), or switch off the DS-L3. Remove the
USB memory in a straight direction.
Inserting/removing a USB memory stick
Drive assignment for USB memories
DS-L3 recognizes up to three USB memory sticks.
This system recognizes USB memories by assigning drive
letters D, E and F in the order of detection.
A USB memory is identified by a drive letter when setting
the saving destination or playing back an image.
Drive allocation example
(replaying folder setting)
(2) Initializing a USB memory
Initialize a USB memory as necessary.
Note: See “4.3.4 Initializing Recording Medium” for initialization procedures.
USB memory
stick
Select a drive number from D to F.
Summary of Contents for DS-L3
Page 2: ......
