Chapter 15
Performing Direct Printing
204
Conn
ecting to
PC, Printer
, and
Net
w
or
k
15.3
Changing Print Settings
Print settings can be done in the [PRINTER] area in the [SETUP MENU: ADDITIONAL] screen. There are the following
settings.
Item
Initial Setting
See
Enabling or Disabling Printing with Frame
Disable
15.3.1
Selecting Print Mode (Real 10 or Normal Mode)
Normal mode
15.3.2
Setting Compensation (Only in Real 10 Mode)
-
15.3.3
[SETUP MENU: ADDITIONAL] Screen
15.3.1
Enabling or Disabling Printing with Frame
The [FRAME] checkbox allows you to specify whether to add a frame (or edge) when printing. Checking the box enables
printing with a frame.
Printing with a frame
The frame function may not be available depending on the printers. In this case, even though the [FRAME]
checkbox is selected, printing is performed without a frame.
15.3.2
Selecting Print Mode (Real 10 or Normal Mode)
Select the [MAG FIX] (Real 10) checkbox to switch between the “Real 10” and “Normal” mode. The print mode is normal if
cleared, or Real 10 if selected.
•
Normal mode
An image is printed in a size that fits the printer paper form.
•
Real 10 mode
An image is printed in a size specified using the [CMP(50-150%)] (compensation) button. By compensating scaling factor
(between 50% and 150%), you can precisely control the size of the object being printed.
[FRAME] checkbox
Enable or disable printing with
frame.
[MAG FIX] checkbox
Switch print mode between
Real 10 mode and Normal
mode.
[CMP(50-150%)] button
Specify scaling ratio
compensation for Real 10 mode.
[PRINT TEST] button
Perform printing with a scale for
magnification adjustment.
Summary of Contents for DS-L3
Page 2: ......
