Safety Precautions (Be sure to read the following before use)
xi
Saf
e
ty
Pr
ec
a
u
tion
s (
B
e
sur
e
to
rea
d
th
e fo
llo
wing
bef
ore
us
e)
Safety Precautions (Be sure to read the following before use)
Although this product is designed and manufactured to be completely safe during use, incorrect usage or failure to follow the
safety instructions provided may cause personal injury or property damage. To ensure correct usage, read this manual
carefully before using the product. Do not discard this manual and keep it at hand for future reference.
WARNING and CAUTION Symbols Used in This Manual
Safety instructions in this manual are marked with the following symbols to make them stand out. For your safety, always
follow the instructions marked with these symbols.
Symbol
Description
DANGER
Disregarding instructions marked with this symbol will lead to serious injury or death.
CAUTION
Disregarding instructions marked with this symbol may lead to injury or property damage.
WARNING
1.
Purpose of this product
The principal use of this product is to photograph and display pictures.
2.
Read this manual carefully.
For your safety, read carefully this manual and other manuals supplied with the products that will be used
together with this product. Be sure to read and observe the warnings and cautions described at the beginning of
each manual.
3.
Do not disassemble, repair, or modify this product.
Do not attempt to disassemble, repair, or modify this product. Doing so may result in electric shock or failure. Any
failure or damage caused by such action will not be covered under warranty. Never attempt to disassemble,
repair, and modify any part of this product which is not described in this manual. If you notice any problems with
this product, contact your nearest Nikon representative.
Note especially that the DS-L3 AC adapter has a built-in high-voltage power source. Do never dismantle, repair,
or modify it.
4.
If the inside of this product is exposed due to breakage, never touch the exposed area.
If this product is broken due to falling, etc. and the inside is exposed, do not touch the exposed area. Doing so
may cause an electric shock or personal injury on the jagged broken edge. Remove the battery or power cord
and ask your nearest Nikon representatives for repair.
5.
Always use a specified, 100 to 240 VAC (frequency of 50 to 60 Hz) power supply.
Use only the power supply specified in this manual. Failure to do so may cause electric shock or fire.
6.
Use the specified power cords.
Make sure to use the specified power cord for the DS-L3 AC adapter. If any other power cords are used, it may
cause malfunction or overheating of this product or fire.
•
For details about the specified power cords, see “Chapter 21 Major Specifications”.
•
When plugging or unplugging the power cord, make sure that the product is switched off to avoid
electrification.
•
Because this equipment falls under the category of electric shock protection class I, always make sure it is
grounded to a protective ground terminal.
Summary of Contents for DS-L3
Page 2: ......
