Chapter 9
Playing Back and Deleting Image
111
Photogr
ap
hin
g and
Playi
ng Image
s
Playback folder setting
Shifting to the operation menu other than the VIEW menu resets the VIEW folder settings and the folder same as
the destination folder is set. When you open the VIEW menu, the information on the folder set as the destination is
always displayed.
Using to another menu while playing back an image
When you press the [MENU SELECT] button of the VIEW menu while playing back an image, the operation menu
can be switched with the image still on the screen.
•
When you switch to [CAM MENU], the [FREEZE] button is selected (a blue frame is displayed). Press the button
to release the still image state. The image playback stops.
•
Operations for the [CAM MENU] settings are restricted while the image is being played back. When you display
the [CAM MENU] while the image is being played back, disabled buttons are displayed in gray.
Capturing a playback image
You can capture an image being played back using the image capture operation.
•
An annotation can be added and simplified measurement can be applied to the playback image (See “Chapter 11
Adding Lines and Annotations to an Image” and “Chapter 12 On-Screen Measurement”). Images can be
captured including the annotation and measurement results.
•
When you capture a playback image, it is saved in 1280x960 size regardless of the recorded size or image size
setting.
Comments at the beginning of playback and measurement results
When playback of an image is started, comments (annotations) that have been written and measurement results are
completely cleared.
Scales (XY measurement, X scale, scale, cross line, and grid) are displayed as they are.
The same applies to when playback is complete.
Summary of Contents for DS-L3
Page 2: ......
