Nikon DS-L3 Instructions Manual Download Page 181

Page: 181 / 286

Chapter 13

Changing Settings

165

Cha

nging

Settings

13.2.2

Configuring Monitor

— [DISPLAY SETTING] Area —

Configure the following settings in the [DISPLAY SETTING] area of the [SETUP MENU: MAIN] screen.

Item

Choice

Initial Setting

See

(1) Adjusting the color balance of the internal LCD

[50] to [150] (each of R, G, and B colors)

100 for each

p.165

(2) Configuring the display mode of the internal

LCD and external monitor

[XGA / LCD ON], [SXGA / LCD OFF],
[XGA / LCD OFF]

[XGA / LCD ON]

p.166

(3) Configuring the backlight of the internal LCD

[1] to [9]

[5]

p.167

(4) Mirroring images

[OFF], [H], [V], [180°]

[OFF]

p.167

(5) Adjusting the color balance of external monitor

output signal

[50] to [150] (each of R, G, and B colors)

100 for each

p.168

(6) Configuring the DDC interface

ON, OFF

p.169

(1) Adjusting the color balance of the internal LCD

Adjust the color balance of video to be displayed on the internal LCD of the DS-L3.

Display the [SETUP MENU: MAIN] screen.

Press the [LCD COLOR ADJUST] button in the

[DISPLAY SETTING] - [INTERNAL LCD] area.

The [INTERNAL LCD COLOR ADJUST] window appears.

Adjust each gain for R (red), G (green) and B (blue) by

looking at the screen.

The window shows a slider and adjustment buttons of each
gain of R, G and B in this order from left.

•

Setting range: 50 to 150 (initial setting: 100) for each

color (R/G/B)

Perform adjustment using the slider and left and right
adjustment buttons.

Press the [OK] button.

The [INTERNAL LCD COLOR ADJUST] window closes.

Press the [SAVE] button.

The configured color balance is saved.

Configuring Color Balance of Internal LCD

Internal LCD Color Balance Adjustment Setting Range

Choice

Setting

R, G, B

Adjust each gain for R (red), G (green), and B (blue) within a range of 50 to 150 (initial setting: 100).
Each value can be adjusted in units of step 1 (jump 5).

Summary of Contents for DS-L3































































































































































































































































































Search results

Summary of Contents for DS-L3

Reviews:

Related manuals for DS-L3

Brands by name

Popular brands

Nikon DS-L3, Instructions Manual

Search results

Summary of Contents for DS-L3

Reviews:

Related manuals for DS-L3

Brands by name

Popular brands