manualshive.com logo in svg

Nikon DS-L3, Instructions Manual

The Nikon DS-L3 Quick Reference manual is a comprehensive and user-friendly guide designed to assist you in mastering the features of your camera. Perfect for beginners and professionals alike, this manual provides step-by-step instructions and helpful tips. Download the free manual at manualshive.com and enhance your photography skills today.

Share
Download
background image

 Chapter 20  Daily Maintenance 

260

 

Other 

Information 

20 

Daily Maintenance 

 
This chapter describes how to maintain the system. 
To prolong the performance of this system, Nikon recommends you to perform daily maintenance. 
 
 

20.1 

 

Cleaning Utensils and Consumables 

Cleaning utensils 

•

 Soft-tip brush 

Note

 

•

  Soft cloth (nonwoven cloth, cotton cloth, or gauze) 

Note

 

Note:  Use the cleanroom wiper in the cleanroom. 

Consumables 

•

  Neutral detergent (only when the product main body is very dirty) 

•

  Absolute alcohol (ethyl alcohol or methyl alcohol) (for cleaning the surface of the monitor) 

 
 

20.2 

 

Cleaning the DS-L3 Main Body 

 

•

  Wipe off stains on the DS-L3 main body or cables with a soft cloth or others. If the product is very dirty, gently wipe stains 

using gauze moistened with a small amount of diluted neutral detergent. 

•

  Do not use organic solvent (such as alcohol, ether, and thinner) on coated parts, plastic parts, or printed parts. It causes 

discoloration or exfoliation of printed characters. 

•

  Gently wipe off stains on the surface of the panel of the embedded monitor with a soft and clean cotton cloth, lens tissue, 

or gauze. Only if the lens becomes dirty with fingerprints or grease stains, slightly dampen a piece of soft, clean cotton 
cloth, lens tissue, or gauze with absolute alcohol (ethyl or methyl alcohol) and gently wipe away the stains. 

-

  Since absolute alcohol is highly flammable, be careful in handling it so that it does not ignite. 

-

  Observe the manufacturer’s handling instructions when handling absolute alcohol. 

 
 

20.3 

 

Cleaning the DS-Camera Head 

 

•

  Wipe off stains on the DS camera head main body with a soft cloth or others in a state where the C mount cap is attached. 

If the product is very dirty, gently wipe stains using gauze moistened with a small amount of diluted neutral detergent. 

•

  Do not use organic solvent (such as alcohol, ether, and thinner) on coated parts, plastic parts, or printed parts. It causes 

discoloration or exfoliation of printed characters. 

•

  Blow off duct in the mount of the DS camera head with an air blower. 

 

  Cleaning in the DS Camera Head 

Blow off duct in the mount of the DS camera head with an air blower. However, do not touch the components in the DS 
camera head as far as possible. Especially, never touch the glass filter on the front of the image pickup device. 
When the glass filter of the image pickup device is touched, or dust adhered to the glass filter cannot be removed, make 
sure to ask your supplier cleaning. 

 
 

20.4 

 

Cleaning Optical Devices 

 
Prevent dust or fingerprints from being attached to the lens of optical devices. Stains on the lens degrade the visibility of 
images. 
For details on how to clean optical devices, see the instructions of your optical device. 

 

Daily Maintenance 

20 

Chapter 

Summary of Contents for DS-L3































































































































































































































































































Reviews:

No comments

Related manuals for DS-L3

NEC SL1100 Quick Start Manual preview
SL1100
Brand: NEC Pages: 5
Baintech PowerTop User'S Operation Manual preview
PowerTop
Brand: Baintech Pages: 7
Baicheng Innovations PLUTO User Manual preview
PLUTO
Brand: Baicheng Innovations Pages: 32
DAVIS and Vantage Pro User Manual preview
and Vantage Pro
Brand: DAVIS Pages: 4
Davis Instruments and Vantage Pro Installation Manual preview
and Vantage Pro
Brand: Davis Instruments Pages: 4
Datavideo DVK-300HD Instruction Manual preview
DVK-300HD
Brand: Datavideo Pages: 45
RaceChip Pro 2 Installation Manual preview
Pro 2
Brand: RaceChip Pages: 12
Garmin Edge 510 Owner'S Manual preview
Edge 510
Brand: Garmin Pages: 22
Jetter JX3-BN-CAN Manual preview
JX3-BN-CAN
Brand: Jetter Pages: 4
K&K M5700N Manual preview
M5700N
Brand: K&K Pages: 8
K&K M4700 Manual preview
M4700
Brand: K&K Pages: 20
K&K M3500N Manual preview
M3500N
Brand: K&K Pages: 6
K&K M2500 Manual preview
M2500
Brand: K&K Pages: 3
K&K M1500 Manual preview
M1500
Brand: K&K Pages: 3
X10 FireCracker CK17A Owner'S Manual preview
FireCracker CK17A
Brand: X10 Pages: 1
Waycon UFP Series Installation Manual preview
UFP Series
Brand: Waycon Pages: 8
Wavetronix SmartSensor V Quick Start Manual preview
SmartSensor V
Brand: Wavetronix Pages: 4
X10 LM15A Installation And Operating Instructions preview
LM15A
Brand: X10 Pages: 2

Brands by name

Popular brands

Load more brands