Chapter 12
On-Screen Measurement
154
Addi
ng Ann
ota
tions
and Me
asuri
ng
12.3
Operating Measurement Results
12.3.1
Canceling the Last Measurement Result
If you press the [UNDO MEASUREMENT] button, the most recent
measurement is cancelled and display of its result is deleted.
Canceling Last Measurement Result
12.3.2
Redoing Cancelled Measurement Result
Redisplay the measurement result last cancelled.
Press the [REDO MEASUREMENT] button to redisplay the
measurement result deleted by the [UNDO MEASUREMENT]
button most recently.
Note: Nothing happens if the button is pressed unless you have
cancelled a measurement result.
Redoing Cancelled Measurement Result
12.3.3
Erasing an Arbitrary Measurement Result
An order number given to each measurement result is shown.
Press the [ERASE MEASUREMENT RESULT] button on the
toolbar. The toolbar display changes and buttons for selecting
execution order of measurement results are shown.
•
If the execution history contains more than ten results, switch
the screen with the upper and lower arrow buttons to the right
of the numerical buttons.
•
A number that can be erased is shown in white. A number that
cannot be erased (already erased or not executed) is shown in
gray.
Press the number and press [YES] under the “ERASE ?”
message. The measurement result having that order number is
deleted.
[ERASE MEASUREMENT RESULT] Button
Erasing Measurement Result
Cancel last
measurement result.
Redo previously cancelled
measurement result.
Specify measurement
result number.
Select [YES] to erase.
Delete a specific
measurement result by
specifying its number.
Summary of Contents for DS-L3
Page 2: ......
