Chapter 5
Working with Touch Panel
40
Please
Read Firs
t
5.2.5
Switching between Camera Control and Microscope Control
When a DS camera head and a Nikon microscope are connected to DS-L3, you can control both of them. In addition to the
normal [Camera control] screen, the [Microscope control] screen is added. You can switch these screens by the [
▼
] button
on the task bar.
•
Camera control
This screen is ordinarily displayed when a DS camera head is connected. This screen allows you to configure the DS
camera head settings, to capture and play images, to add annotations on images, and to make measurements.
•
Microscope control
This screen is displayed when a Nikon microscope is connected to the USB (H) connector. DS-L3 controls the motorized
equipment of the microscope and displays the detected status of the microscope on the screen.
Operation method of the microscope control screen
For how you operate the microscope control screen, refer to a separate volume of this manual, “Microscope
Operation”.
Switching screens
When a DS camera head is connected to DS-L3, switching DS-L3 on automatically displays the top screen of Camera
control.
When both a DS camera head and a Nikon microscope are connected, pressing the [
▼
] button on the task bar switches
between top screens of Camera control and Microscope control.
[CAMERA CONTROl] screen
Switched by the
[
▼
] button
[MICROSCOPE CONTROL] screen
Switching between Camera Control and Microscope Control
Switches to the [MICROSCOPE
CONTROL] screen.
Switches to the [CAMERA
CONTROL] screen.
Summary of Contents for DS-L3
Page 2: ......
