Chapter 8
Capturing Images with Advanced Setting Menu
74
Photogr
ap
hin
g and
Playi
ng Image
s
(6) Capturing an image together with scales, annotations, and measurement results
DS-L3 allows you to display scales, to write lines and comments, and to measure lengths and angles on the screen. You can
capture an image together with these operation results embedded in the image.
Adding annotations and performing measurements
For details on the annotation and measurement functions, refer to “Chapter 11 Adding Lines and Annotations to an
Image” and “Chapter 12 On-Screen Measurement”.
1
Display the [TOOL SET: MAIN] screen, and operate in the
[PASTE TO IMAGE] area to select the type of information
to be embedded in the image.
The following types of information can be embedded in the
image.
•
XY scales
•
X scales (cross scales)
•
Scales
•
Cross hairs
•
Grids
•
Overlay (straight line, curved line, text, measurement result)
Note: For how to operate on the tool setting screen, refer to
“11.2.1 Performing Basic Settings for Comment
Function and Measurement Function”.
2
Display the target image on the monitor.
There are the following restrictions depending on the image
mode.
•
For the live image, replayed images, and still images, the
tool menu and the tool bar functions cannot be used when
the image mode is ROI-L, ROI-S, or C.SCAN.
•
For the two-screen mode, these functions can be used only
when the image mode is FULL. For details, refer to the
remarks below.
3
Add annotations or measure lengths and angles.
Add annotations using [TOOL MENU] and perform
measurement using [TOOL BAR].
4
Display
[CAM
MENU].
5
Press the [CAPTURE] button.
Among scales on the screen, annotations, and measurement
results that are displayed on the monitor, those specified in
step 1 will be recorded without change as an image file in
which they are embedded.
Automatic switching of the image mode
•
When the image mode is [ROI-L/S] or [C.SCAN] with the
live image, selecting the tool menu or tool bar
automatically switches the image mode to [FULL].
•
When images are replayed with the image mode being
[ROI-L/S] or [C.SCAN], selecting the tool menu or tool
bar automatically switches the image mode to [FULL],
stops the replaying, and displays the live image.
•
When the image is pausing with the image mode being
[ROI-L/S] or [C.SCAN], selecting the tool menu or tool
bar automatically switches the image mode to [FULL],
releases the pausing condition, and displays the live
image.
•
In the case of two-screen mode, the image mode
automatically switches to [FULL]. Setting the image
mode to other than [FULL] during the two-screen mode
switches the screen to the one-screen mode.
Operating the scale and annotation buttons
Adding annotations and performing measurements
Capturing the image with embedded information
on [TOOL SET: MAIN]
1
Select the type
of information to
be embedded in
the image.
5
2, 3
4
Display the target screen
to add annotations or
perform measurements.
Summary of Contents for DS-L3
Page 2: ......
