NetApp AFF A700, System Documentation

Page: 464 / 1672

If the impaired node is
displaying… Then…
System prompt or password
prompt (enter system password) Take over or halt the impaired node:
• For an HA pair, take over the impaired node from the healthy
node: storage failover takeover -ofnode
impaired_node_name
When the impaired node shows Waiting for giveback…, press
Ctrl-C, and then respond
y
.
Step 2: Remove the controller module
To access components inside the controller module, you must remove the controller
module from the chassis.
1. If you are not already grounded, properly ground yourself.
2. Unplug the controller module power supply from the power source.
3. Loosen the hook and loop strap binding the cables to the cable management device, and then unplug the
system cables and SFPs (if needed) from the controller module, keeping track of where the cables were
connected.
Leave the cables in the cable management device so that when you reinstall the cable management
device, the cables are organized.
4. Remove and set aside the cable management devices from the left and right sides of the controller module.
5. Remove the controller module from the chassis:
461