NEC Express5800/320Fd-MR, User Manual

Page: 64 / 484

General Description 2-31
DVD-ROM drive
NEC Express5800/ft series has a DVD-ROM drive on the front panel. It is a device used to read
data from an optical disk (compact disc read-only memory). Compared to a floppy disk, an optical
disk allows for larger volume and fast data readout.
CAUTION
Observe the following instructions to use the server safely. There are risks of a
burn, injury, or damage to physical assets. For details, see “PRECAUTIONS
FOR SAFETY” in Chapter 1.
„
Do not leave the DVD-ROM drive tray ejected.
Insert/Remove DVD-ROM
Follow the steps below to set an optical disk.
1.
Before you insert an optical disk, make sure that the server is powered on. When the
server is powered on, the LED illuminates in green.
2.
Press the tray-eject button located in the front of the
DVD-ROM drive. The tray is then ejected.
3.
Hold the optical disk with its signaling side facing the tray.
4.
As shown in the figure on the right, place the optical disk
on the tray and press lightly on the center to lock.
5.
Push the front side of the tray gently to the drive-closed
position.
IMPORTANT:
If you hear noise while running the DVD-ROM drive,
reset the optical disk.