NEC Express5800/320Fd-MR, User Manual

Page: 228 / 484

5-30 Installing and Using Utilities
Example
CPU Information
In [CPU Information] of DataViewer’s system tree, the external clock is listed as “Unknown.”
When [ft] Tree Appears on Date Viewer in an Incorrect Manner
If you open a DataViewer immediately after the system starts up, the tree or the state of a
DataViewer may not be displayed correctly due to high load of the system. In about 20 minutes after
the system startup, when a pop-up message (below) which prompts you to reconstruct a DataViewer
appears, click [OK]. The DataViewer will be reconstructed and the tree and the status will be
displayed correctly.
DataViewer
The system configuration of the host may have been changed. Do you wish to reconstruct the
tree?
Floppy Disk Drive Name
After unplugging and plugging the PCI module of the primary side, the floppy disk drive name of
[I/O Device] on DataViewer may be different from the name that is recognized by the OS.
(Example: drive name on DataViewer: “A”
drive name recognized by the OS: “B”)
Check the floppy disk drive name on Explorer.
Floppy Disk Drive Information
If you add or delete floppy disk drive connected with USB while the system is running, the drive
information under the [I/O Device] in the DataViewer will be updated at the next system startup.
Information of the keyboard/mouse connected with USB
When the keyboard or mouse is connected with USB, the keyboard or mouse information under the
[I/O Device] in the DataViewer is listed as “Unknown.”