NEC Express5800/320Fd-MR, User Manual

Page: 225 / 484

Installing and Using Utilities 5-27
LAN Monitoring Report
The LAN monitoring function defines the line status depending on the number of transmission
packets and the number of packet errors within a certain period. Thus, the LAN monitoring function
may report a line fault or high line load only in a temporary high line impedance state. If a normal
state recovery is reported immediately, temporal high line impedance may have occurred thus there
is not any problem.
LAN Monitoring Threshold
Because the NEC Express5800/ft series detects hardware faults on the network in the driver level,
NEC ESMPRO Agent does not monitor line faults. Thus, the value set for “Line fault occurrence
rate” of a [LAN] tab of [NEC ESMPRO Agent properties] in the control panel is not used.
Community Authority
Depending on your OS type or its version, settings for community, SNMP service’s security
function, are not made, or default settings of authority are different.
To enable the remote shutdown and threshold change functions via NEC ESMPRO Manager, make
settings of community and set its authority to “READ CREATE” or “READ WRITE.”
Hardware Monitoring by ESMPRO
In NEC Express5800/320Fc-MR, an alert report is not issued if an error on temperature/fan/power
supply/voltage is detected in CPU module and PCI module.
Moreover, the trees [Temperature], [Fan], [Voltage], and [Power Supply] are not displayed on
[System Environment] of DataViewer of NEC ESMPRO Manager.
System Environment Monitoring
On NEC Express5800/320Fd-MR, monitoring of temperature, fan and voltage under [System
Environment] of [ESMPRO] tree in the DataViewer is set to enable and cannot be changed to
disable by default.
Change of SNMP Community
If the security setting of the SNMP Service of a system, where the NEC ESMPRO Agent is installed,
is changed from the default “public” to a community name, change the community settings of the
NEC ESMPRO Agent, too.
1.
Double-click the [NEC ESMPRO Agent] icon in [Control Panel].
2.
Select a desired community name from the [SNMP Community] list box in [SNMP