NEC Express5800/320Fd-MR, User Manual

Page: 131 / 484

System Configuration 4-25
Monitoring Configuration
Select “Monitoring Configuration” on the Server menu and press
Enter
to display the following
screen.
Option Parameter Description
FRB-2 timer Disabled
[Enabled] Select whether or not to enable the FRB-2 timer.
PCI Enumeration
Monitoring Disabled
[Enabled] Select whether or not to enable the function to monitor
PCI Device scan.
PCI Enumeration
Monitoring Timeout 60-[180]-1200 Set the timeout for PCI Device scan. (unit: second)
Option ROM Scan
Monitoring Disabled
[Enabled] Select whether or not to enable the function to monitor
the extended ROM scan.
Option ROM Monitoring
Timeout 60-[300]-1200
Set the timeout of the extended ROM scan. (unit:
second)
OS Boot Monitoring Disabled
[Enabled] Select whether or not to enable the function to monitor
OS boot-up. If you are starting up from an OS with no
NEC ESMPRO Agent installed, disable this option. If
you use Disaster Recovery Option for ARCServe,
select [Disabled].
OS Boot Monitoring
Timeout 60-[600]-1200 Set the timeout at OS boot-up. (unit: second)
POST Pause Monitoring Disabled
[Enabled] Set whether or not to enable the POST monitoring
function during boot pause. (unit: second)
Main Advanced Security Server Boot Exit
ftServer Setup
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select Sub Menu F10 Save and Exit
Monitoring Configuration Item Specific Help
Disables/enables the
FRB-2 Timer.
FRB-2 Timer [ Enabled ]
PCI Enumeration Monitoring: [Enabled]
PCI Enumeration Monitoring Timeout: [ 180]
Option ROM Scan Monitoring: [Enabled]
Option ROM Scan Monitoring Timeout: [ 300]
OS Boot Monitoring: [Enabled]
OS Boot Monitoring Timeout: [ 600]
POST Pause Monitoring: [Enabled]
POST Pause Monitoring Time-out [ 180]