11.6.25.16 Error 24-40 (emergency code 7307h)
Cause: Channel 3 Initialization, Np: error from review of parameters 'Lines' and
'NominalIncrement'
Suggested steps:
Please check this parameters.
Initialization encoder
channel
l
This is probably a problem of the
parameterization!
l
In any case look at init outputs in the message
window of the
Moog D
RIVE
A
DMINISTRATOR
5 .
11.6.25.17 Error 24-41 (emergency code 7307h)
Cause: Channel 1/3 Initialization, EndDat: common error
Suggested steps:
Please note the extended information of the error message
Initialization encoder
channel
l
Error during the initialization routines of
encoder channel.
l
In any case look at init outputs in the message
window of the
Moog D
RIVE
A
DMINISTRATOR
5 .
l
The most common cause of error is the wiring
to the encoder.
MOOG
ID No.: CB40859-001 Date: 11/2020
MSD Servo Drive - Device Help
394
11 Alarms & warnings
11.6.25.18 Error 24-42 (emergency code 7307h)
Cause: Channel 3 Initialization, SSI: common error
Suggested steps:
Please note the extended information of the error message
Initialization encoder
channel 3
l
Error during the initialization routines of
encoder channel 3.
l
In any case look at init outputs in the message
window of the
Moog D
RIVE
A
DMINISTRATOR
5 .
l
The most common cause of error is the wiring
to the encoder.
11.6.25.19 Error 24-43 (emergency code 7307h)
Cause: Channel 3 Initialization, SinCos: common error
Suggested steps:
Please note the extended information of the error message
Initialization encoder
channel 3
l
Error during the initialization routines of
encoder channel 3.
l
In any case look at init outputs in the message
window of the
Moog D
RIVE
A
DMINISTRATOR
5 .
l
The most common cause of error is the wiring
to the encoder.
