11.6.23.3 Error 22-3 (emergency code 7305h)
Cause: Channel 1 Initialization, SinCos: error, encoder monitoring
Suggested steps:
Please connect the encoder correctly.
Initialization encoder
channel 1
l
Error during the initialization routines of
encoder channel 1.
l
In any case look at init outputs in the message
window of the
Moog D
RIVE
A
DMINISTRATOR
5
l
The most common cause of error is the wiring
to the encoder.
11.6.23.4 Error 22-4 (emergency code 7305h)
Cause: Channel 1 Initialization, EndDat 2.1: error, no EnDat 2.1 encoder (May be,
it's an SSI encoder!?)
Suggested steps:
No further information available. Please contact your service provider.
Initialization encoder
channel 1
l
Error during the initialization routines of
encoder channel 1.
l
In any case look at init outputs in the message
window of the
Moog D
RIVE
A
DMINISTRATOR
5
l
The most common cause of error is the wiring
to the encoder.
MOOG
ID No.: CB40859-001 Date: 11/2020
MSD Servo Drive - Device Help
380
11 Alarms & warnings
11.6.23.5 Error 22-5 (emergency code 7305h)
Cause: Channel 1 Initialization, EndDat 2.1: error, 'Lines' read from encoder
Suggested steps:
Please note additional Information in the message window of the
Moog D
RIVE
A
DMINISTRATOR
5 .
Initialization encoder
channel 1
l
Error during the initialization routines of
encoder channel 1.
l
In any case look at init outputs in the message
window of the
Moog D
RIVE
A
DMINISTRATOR
5 .
l
The most common cause of error is the wiring
to the encoder.
11.6.23.6 Error 22-6 (emergency code 7305h)
Cause: Channel 1 Initialization, EndDat 2.1: error, 'MultiTurn' read from encoder
Suggested steps:
Please note additional Information in the message window of the
Moog D
RIVE
A
DMINISTRATOR
5 .
Initialization encoder
channel 1
l
Error during the initialization routines of
encoder channel 1.
l
In any case look at init outputs in the message
window of the
Moog D
RIVE
A
DMINISTRATOR
5 .
l
The most common cause of error is the wiring
to the encoder.
