Set the synchronization mode to “EGEAR_PARA(4) = Electronic gearing via
parameters.”
Image 9.6: Set the EGEAR pulse direction
Select “Master configuration” in the screen.
Set the channel selection and anti-reverse mode.
Selection options:
TP0(6) = Pulse counter on probe channel 1 (TP0)
TP1(7) = Pulse counter on probe channel 1 (TP1)
MOOG
ID No.: CB40859-001 Date: 11/2020
MSD Servo Drive - Device Help
297
9 Inputs/Outputs settings
Image 9.7: Pulse direction master configuration
In the screen, select “Electric gearing.”
Set the gear ratio.
Image 9.8: Selecting the electric gearing pulse direction
Enable the function with “Start E-Gear.”
NOTE
l
The signals ISD06 and ISD05 are HTL signals, which is why the
voltage level must be greater than 20 V. The frequency must not
be higher than 300 kHz.
