manualshive.com logo in svg

Mitsubishi Electric RD77MS16, User Manual

The Mitsubishi Electric RD77MS16, a state-of-the-art device for industrial automation, is accompanied by a comprehensive User Manual. This intuitively designed manual provides step-by-step instructions, troubleshooting tips, and essential information for users. Download the free manual from manualshive.com to maximize the potential of your RD77MS16 and streamline your operations.

Share
Download
background image

9  COMMON FUNCTIONS

9.6  Amplifier-less Operation Function

319

9

9.6

Amplifier-less Operation Function

The positioning control of Simple Motion module without servo amplifiers connection can be executed in the amplifier-less 

function. This function is used to debug of user program or simulate of positioning operation at the start.

Control details

Switch the mode from the normal operation mode (with servo amplifier connection) to the amplifier-less operation mode 

(without servo amplifier connection) to use the amplifier-less operation function.

Operation for each axis without servo amplifier connection as the normal operation mode can be executed during amplifier-

less operation mode. The start method of positioning control is also the same procedure of normal operation mode.

The normal operation (with servo amplifier connection) is possible by switching from the amplifier-less operation mode to the 

normal operation mode after amplifier-less operation.

The current value management (current feed value, machine feed value) at the switching the normal operation mode and 

amplifier-less operation mode is shown below.

■

Point for control details

 • Switch of the normal operation mode and amplifier-less operation mode is executed by the batch of all axes. Switch of the 

operation mode for each axis cannot be executed.

 • Only axis that operated either the followings before switching to the amplifier-less operation mode becomes the connection 

status during amplifier-less operation.

 • Suppose the following servo amplifier and servo motor are connected during amplifier-less operation mode.

"Absolute position 
detection system 
(PA03)"

Current value management at the operation mode switching

Normal operation mode 

 Amplifier-

less operation mode

Amplifier-less operation mode 

 Normal operation mode

"0: Disabled"

The current feed value and machine feed value 
are "0".

The current feed value and machine feed value are "0". (At the 
communication start to the servo amplifiers)

"1: Enabled"

The amplifier-less operation mode starts with the 
address that the servo amplifier's power supply 
was finally turned OFF.

However, the home position is not established in 
the normal operation mode, the current feed 
value and machine feed value are "0".

The current feed value and machine feed value are restored according the 
actual position of servomotor. (At the communication start to the servo 
amplifiers)

However, when the home position is not established in the normal operation 
mode before switching to the amplifier-less operation mode, the current 
feed value and machine feed value are not restored. Execute the home 

position return.
When the mode is switched to the normal operation mode after moving that 
exceeds the range "-2147483648(-2

31

) to 2147483647(2

31

-1) [pulse]" from 

the actual position of servo motor during amplifier-less operation mode, the 
current feed value and machine feed value might be not restored correctly.

• "[Pr.100] Connected device" is set, and then the written to flash ROM is executed. (Turn the power supply ON or reset the CPU module after written to flash 

ROM.)

•  "[Pr.100] Connected device" is set, and then the PLC ready signal is turned ON.) (Servo amplifier connection is unnecessary.)

[Pr.97] SSCNET setting

Servo amplifier type

Motor type

1: SSCNET

/H

MR-J4-10B

HG-KR053 (Resolution per servo motor rotation: 4194304 pulses)

0: SSCNET

MR-J3-10B

HF-KP053 (Resolution per servo motor rotation: 262144 pulses)

Summary of Contents for RD77MS16





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RD77MS16

Zetkama 221 User Manual preview
221
Brand: Zetkama Pages: 6
Facility Explorer FX Series Installation Instructions preview
FX Series
Brand: Facility Explorer Pages: 4
Daikin BRC1H71W Installation Manual preview
BRC1H71W
Brand: Daikin Pages: 38
Daikin BRC1H71W Operation Handbook preview
BRC1H71W
Brand: Daikin Pages: 2
Daikin BRC1E72 Operation Manual preview
BRC1E72
Brand: Daikin Pages: 148
Daikin EHVH04S18CA Operation Manual preview
EHVH04S18CA
Brand: Daikin Pages: 12
Daktronics RC-100 Operation Manual preview
RC-100
Brand: Daktronics Pages: 52
Waeco RC-100 Installation And Operating Instructions Manual preview
RC-100
Brand: Waeco Pages: 20
Z-Wave RC-100 Operating Instructions Manual preview
RC-100
Brand: Z-Wave Pages: 56
Fanimation BTCR9 Quick Start Manual preview
BTCR9
Brand: Fanimation Pages: 2
M2M C600 Technical Manual preview
C600
Brand: M2M Pages: 24
Hama Flashlight Blue Operating Instruction preview
Flashlight Blue
Brand: Hama Pages: 10
Hama Air Grip Operating Instruction preview
Air Grip
Brand: Hama Pages: 4
Hama 62863 Operating Instruction preview
62863
Brand: Hama Pages: 14
Hama 62875 Operating Instruction preview
62875
Brand: Hama Pages: 5
Sanhua MDF Series Instructions preview
MDF Series
Brand: Sanhua Pages: 3
G-Force UNDER CONTROL CP-30A PILOT User Manual preview
UNDER CONTROL CP-30A PILOT
Brand: G-Force Pages: 2
AUMA SAE 07.2 Series Operation, Assembly And Commissioning Instructions preview
SAE 07.2 Series
Brand: AUMA Pages: 116

Brands by name

Popular brands

Load more brands