Mitsubishi Electric RD77MS16 User Manual Download Page 209

Page: 209 / 644

7 EXPANSION CONTROL

7.1 Speed-torque Control

207

Speed control mode

■

Operation for speed control mode

The speed control is executed at the speed set in "[Cd.140] Command speed at speed control mode" in the speed control

mode.

Set a positive value for forward rotation and a negative value for reverse rotation. "[Cd.140]" can be changed any time during

the speed control mode.

Acceleration/deceleration is performed based on a trapezoidal acceleration/deceleration processing. Set acceleration/

deceleration time toward "[Pr.8] Speed limit value" in "[Cd.141] Acceleration time at speed control mode" and "[Cd.142]

Deceleration time at speed control mode". The value at speed control mode switching request is valid for "[Cd.141]" and

"[Cd.142]".

The command speed during the speed control mode is limited with "[Pr.8] Speed limit value". If the speed exceeding the

speed limit value is set, the warning "Speed limit value over" (warning code: 0991H) occurs, and the operation is controlled

with the speed limit value.

Confirm the command speed to servo amplifier with "[Md.122] Speed during command".

■

Current feed value during speed control mode

"[Md.20] Current feed value", "[Md.21] Machine feed value" and "[Md.101] Real current value" are updated even in the speed

control mode.

If the current feed value exceeds the software stroke limit, the error "Software stroke limit +" (error code: 1993H) or "Software

stroke limit -" (error code: 1995H) occurs and the operation switches to the position control mode. Invalidate the software

stroke limit to execute one-way feed.

[Pr.8] Speed limit value

20000

30000

-10000

-20000

[Pr.8] Speed limit value

30000

20000

-10000

-20000

The command speed to servo amplifier is stored
in "[Md.122] Speed during command".

Deceleration time

[Cd.141]

at speed control
mode

Acceleration time

[Cd.142]

at speed control
mode

[Cd.141]

at speed control mode

Acceleration time

Deceleration time

[Cd.142]

at speed control mode

[Cd.140] Command speed at speed

control mode

Summary of Contents for RD77MS16





































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RD77MS16

Reviews:

Brands by name

Popular brands

Mitsubishi Electric RD77MS16, User Manual

Search results

Summary of Contents for RD77MS16

Reviews:

Brands by name

Popular brands