Mitsubishi Electric RD77MS16 User Manual Download Page 256

Page: 256 / 644

254

8 CONTROL SUB FUNCTIONS
8.5 Functions to Change the Control Details

Override function

The override function changes the command speed by a designated percentage (0 to 300%) for all control to be executed.

The speed can be changed by setting the percentage (%) by which the speed is changed in "[Cd.13] Positioning operation

speed override".

Control details

The following shows that operation of the override function.

• A value changed by the override function is monitored by "[Md.22] Feedrate".

• If "[Cd.13] Positioning operation speed override" is set to 100%, the speed will not change.

• If "[Cd.13] Positioning operation speed override" is set with a value less than "100 (%)" and "[Md.22] Feedrate" is less than

"1", the warning "Less than minimum speed" (warning code: 0904H) occurs and "[Md.22] Feedrate" is set with "1" in any

speed unit.

• If "[Cd.13] Positioning operation speed override" is set to "0 (%)", the speed is set to "0" and the speed change 0 flag

([Md.31] Status: b10) is set to "1". At the time, the warning "Less than minimum speed" (warning code: 0904H) does not

occur.

• If there is not enough remaining distance to change the speed due to the "override function", when the speed is changed

during the position control of speed-position switching control or position-speed switching control, the operation will be

carried out at the speed that could be changed.

• If the speed changed by the override function is greater than the "[Pr.8] Speed limit value", the warning "Speed limit value

over" (warning code: 0991H) will occur and the speed will be controlled at the "[Pr.8] Speed limit value". The "[Md.39] In

speed limit flag" will turn ON.

Precaution during control

• When changing the speed by the override function during continuous path control, the speed change will be ignored if there

is not enough distance remaining to carry out the change.

• The warning "Deceleration/stop speed change" (warning code: 0990H) occurs and the speed cannot be changed by the

override function in the following cases. (The value set in "[Cd.13] Positioning operation speed override" is validated after a

deceleration stop.)

• When the speed is changed by the override function during interpolation control, the required speed is set in the reference

axis.

• When carrying out consecutive speed changes by the override function, be sure there is an interval between the speed

changes of 10 ms or more. (If the interval between speed changes is short, the Simple Motion module will not be able to

track, and it may become impossible to carry out commands correctly.)

• When a machine home position return is performed, the speed change by the override function cannot be carried out after

a deceleration start to the creep speed following the detection of near-point dog ON. When the override is enabled during

home position return and the speed is changed, the override is disabled and the speed accelerates to the creep speed after

the near point dog ON is detected.

• When deceleration is started by the override function, the deceleration start flag does not turn ON.

• The override function cannot be used during speed control mode, torque control mode or continuous operation to torque

control mode.

• During deceleration by a stop command
• During automatic deceleration during positioning control

[Da.8] Command speed

100

150

100

200

[Md.22] Feedrate

[Cd.13] Positioning operation

speed override

Speed change 0 flag
([Md.31] status: b10)

Not affected by the override
value during deceleration.

Not enough remaining
distance could be secured,
so operation is carried out
at an increased speed.

Summary of Contents for RD77MS16





































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RD77MS16

Reviews:

Brands by name

Popular brands

Mitsubishi Electric RD77MS16, User Manual

Search results

Summary of Contents for RD77MS16

Reviews:

Brands by name

Popular brands