manualshive.com logo in svg

Mitsubishi Electric RD77MS16, User Manual

The Mitsubishi Electric RD77MS16, a state-of-the-art device for industrial automation, is accompanied by a comprehensive User Manual. This intuitively designed manual provides step-by-step instructions, troubleshooting tips, and essential information for users. Download the free manual from manualshive.com to maximize the potential of your RD77MS16 and streamline your operations.

Share
Download
background image

240

8  CONTROL SUB FUNCTIONS
8.4  Functions to Limit the Control

Relation between the software stroke limit function and various controls

: Check valid

: Check is not made when the current feed value is not updated (

Page 422 [Pr.21] Current feed value during speed 

control) at the setting of "current feed value" in "[Pr.14] Software stroke limit selection" during speed control.

: Check not carried out (check invalid).

: Valid only when "0: valid" is set in the "[Pr.15] Software stroke limit valid/invalid setting".

*1

The value in "[Md.20] Current feed value" will differ according to the "[Pr.21] Current feed value during speed control" setting.

*2

When the unit is "degree", check is not made during speed control.

*3

When the unit is "degree", check is not carried out.

Precautions during software stroke limit check

 • A machine home position return must be executed beforehand for the "software stroke limit function" to function properly.

 • During interpolation control, a stroke limit check is carried out for the every current value of both the reference axis and the 

interpolation axis. Every axis will not start if an error occurs, even if it only occurs in one axis.

 • During circular interpolation control and 3-axis helical interpolation control (reference axis and interpolation axis), the 

"[Pr.12] Software stroke limit upper limit value"/"[Pr.13] Software stroke limit lower limit value" may be exceeded. In this 

case, a deceleration stop will not be carried out even if the stroke limit is exceeded. Always install an external limit switch if 

there is a possibility the stroke limit will be exceeded.

Control type

Limit check

Processing at check

Home position 
return control

Machine home position 
return control

Data set method

The current value will not be changed if the home position 
address is outside the software stroke limit range.

Other than "Data set 
method"

Check not carried out.

Fast home position return control

Major 
positioning 

control

Position control

1-axis linear control

Checks 1) and 2) in 

Page 239 Software stroke limit 

check details are carried out.

For speed control: The axis decelerates to a stop when it 
exceeds the software stroke limit range.
For position control: The axis comes to an immediate 

stop when it exceeds the software stroke limit range.

2 to 4-axis axis linear 

interpolation control

1-axis fixed-feed 

control

2 to 4-axis fixed-feed 
control (interpolation)

2-axis circular 
interpolation control

3-axis helical 
interpolation control

1 to 4-axis speed control

*1*2

Speed-position switching control, Position-speed 

switching control

*1*2

Other control

Current value changing

The current value will not be changed if the new current 
value is outside the software stroke limit range.

JUMP instruction, NOP 
instruction, LOOP to 

LEND

Check not carried out.

Manual control

JOG operation, Inching operation

*3

Check 1) in 

Page 239 Software stroke limit check 

details is carried out.

The machine will carry out a deceleration stop when the 
software stroke limit range is exceeded. If the address is 
outside the software stroke limit range, the operation can 

only be started toward the moveable range.

Manual pulse generator operation

*3

Expansion 
control

Speed-torque control

Check 1) in 

Page 239 Software stroke limit check 

details is carried out.
The mode switches to the position control mode when the 

software stroke limit range is exceeded, and the 
operation immediately stops.

Summary of Contents for RD77MS16





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RD77MS16

ZETRON MAX Connection Manual preview
MAX
Brand: ZETRON Pages: 3
ADEMCO MAX Programming Instructions preview
MAX
Brand: ADEMCO Pages: 2
3M PX5 Series Reference Manual preview
PX5 Series
Brand: 3M Pages: 34
DayTronic 3700 Series Instruction Manual preview
3700 Series
Brand: DayTronic Pages: 22
DayTronic System 10 User Manual Book preview
System 10
Brand: DayTronic Pages: 414
Uclear Motion Series User Manual preview
Motion Series
Brand: Uclear Pages: 40
nekos SKY 650 Manual For Installation And User Manual preview
SKY 650
Brand: nekos Pages: 8
nekos SKY 450 Installation And Use Manual preview
SKY 450
Brand: nekos Pages: 8
Neles PB2 Series Installation Maintenance And Operating Instructions preview
PB2 Series
Brand: Neles Pages: 12
Parker AC890PX Series User Mounting And Assembly Instructions preview
AC890PX Series
Brand: Parker Pages: 30
Parker Compax3M Series Installation Manual preview
Compax3M Series
Brand: Parker Pages: 52
Parker AC30V Series Manual preview
AC30V Series
Brand: Parker Pages: 337
X-lander X-cite Manual preview
X-cite
Brand: X-lander Pages: 72
X Rocker 2.1 Wireless Manual preview
2.1 Wireless
Brand: X Rocker Pages: 38
Parker PWD Series Operation Manual preview
PWD Series
Brand: Parker Pages: 38
Parker Racor RK 30770 Operation And Safety Instructions preview
Racor RK 30770
Brand: Parker Pages: 2
AirCycler SmartExhaust Manual preview
SmartExhaust
Brand: AirCycler Pages: 2
TS Performance Torque Converter Lock-Up Manual preview
Torque Converter Lock-Up
Brand: TS Performance Pages: 4

Brands by name

Popular brands

Load more brands