Mitel Inter-Tel 5000, Installation And Maintenance Manual

Page: 93 / 468

Chapter 4: Specifications
Processing Server (PS-1)
Inter-Tel
®
5000 Installation Manual – Issue 2.4, May 2008
Page 4-31
Processing Server (PS-1)
This section describes specifications relevant to the PS-1.
Processing Server Characteristics
Table 4-13 summarizes the physical, electrical, and server computing characteristics of the PS-
1. For a summary of suitable environmental characteristics see “Environmental Requirements”
on
page 4-4 .
PS-1 Licensing
Adding the PS-1 to the Inter-Tel 5000 platform requires the following licensing, at a minimum:
•
Inter-Tel 5000 v2.0 software, part no. 840.0622
•
Inter-Tel CS-5600 License Base, part no. 840.0624
Additional licensing is required if upgrading a system from an earlier hardware version, if using
IP Networking, and/or adding certain endpoints. For details of required licensing, see “Licensing
for v2.x and Inter-Tel CS-5600 Upgrades” on
page 3-15 .
Table 4-13. PS-1 Specifications
Characteristic Description
Physical dimensions
Length 14.50 in. (36.83 cm)
Width 17.00 in. (43.18 cm)
Height 01.75 in. (04.45 cm)—1 U
Weight 9 lb (4.08 kg), approximately
Electrical
Power requirements 105–125 VAC, 57–63 Hz (USA);
240 VAC, 50 Hz [Europe]
Server computer
Processor Intel
®
Pentium 4, 2.8 GHz
Operating System Linux
®
Debian v2.6
Hard drive capacity 80 GB
RAM 1 GB
System interfaces
LAN 100 Mbps Ethernet
online Monitor (OLM) RS-232, DB-9 serial port with null modem cable
Security Key USB 2.0
IMPORTANT
When installing v2.x software, the license must match the system CPU
type. An Inter-Tel CS-5200 system requires a CS-5200 license; an
Inter-Tel CS-5400 system requires a CS-5400 license; and, an Inter-Tel
CS-5600 system requires a CS-5600 license.