manualshive.com logo in svg

Mitel Inter-Tel 5000, Installation And Maintenance Manual

Share
Download
Mitel Inter-Tel 5000 Installation And Maintenance Manual Download Page 267

Chapter 5: Installation

Upgrading System Memory

Inter-Tel

® 

5000 Installation Manual – Issue 2.4, May 2008

Page 5-145

6. 

Remove the Inter-Tel memory card and insert the new memory card into the slot labeled 
COMPACT FLASH, as shown in the following example. 

7. 

Plug in the power cord.

8. 

Restore the database. For details see 

page 5-94

.

9. 

Restore the voice processor database. See 

page 5-94

 for details. By default, Basic 

Voice Mail is enabled. If using an external voice processing system, you will need to 
disable BVM after restoring the voice processor database. Use the Administration Web 
pages to verify that Basic Voice Mail is disabled.

10. 

Check for any software updates and install them, if necessary. See 

page 5-137

 for 

details. Although the larger CF card has all the software included, always check for the 
latest software updates to the system at the Inter-Tel 

edGe

®

 TechCentral 

Software 

Downloads

 (www.inter-tel.com/software) Web site. You will be prompted to reboot if a 

reboot is needed. If using the Upgrade All option, the system will reboot automatically, if 
needed.

11. 

Reload the license file. 

12. 

Access the Administrator Web Session pages and do the following:

a. Click the 

Advanced View

 link at the top of the window, and then navigate to the IP 

Settings tab. Click the 

IP Access Control

 link in the navigation bar.

b. Enter any rules that were listed on this page prior to the upgrade. 

Compact
Flash

Chassis Front

Eject Button

Summary of Contents for Inter-Tel 5000





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands