manualshive.com logo in svg

Mitel Inter-Tel 5000, Installation And Maintenance Manual

Share
Download
Mitel Inter-Tel 5000 Installation And Maintenance Manual Download Page 278

Chapter 5: Installation
Mitel Endpoint Hardware Installation and Cabling Procedure

Page 5-156

Inter-Tel

® 

5000 Installation Manual – Issue 2.4, May 2008

Mitel Endpoint Hardware Installation and Cabling Procedure 

To install Mitel IP endpoints:

1. 

Plug the handset cord into the handset port and thread it through one of the slots on 
either side of the base unit. See Figure 5-61 on 

page 5-156

 for connection point 

examples. 

2. 

Thread the LAN cable plug through the slot on the back of the installed base unit, and 
plug it into the LAN port on the back of the endpoint.

3. 

Plug the other end of the LAN cable into one of the following:

 •

Phone port on Ethernet power adapter (power brick). Then, connect the Ethernet 
adapter to the LAN using a separate LAN cable. Plug the power adapter into an AC 
power outlet. 

 •

LAN-powered (PoE) jack. The LAN-powered endpoint can also provide power to 
any attached peripheral, such as a conference unit or a DSS/BLF console 
(reserved for future use).

4. 

(Optional) Plug the headset cord into the headset port on the back of the endpoint. 
Thread the headset cord through one of the slots on either side of the base unit, as 
shown for the handset cord in Figure 5-61 on 

page 5-156

.

5. 

Optional for Model 5224 (reserved for future use): For the LAN-powered 5224 endpoint 
equipped with a peripheral (for example, the Model 5310 IP Conference Unit), plug the 
DC adapter cord (part number 51005172) into the power input and AC power outlet.

6. 

Do either of the following:

 •

Continue to “Wall-Mounting Mitel IP Endpoints” on 

page 5-157

. 

 •

Continue to “Initial Mitel Endpoint – Automatic Configuration (DHCP)” on 

page 5-

159

. 

 •

Continue to “Initial Mitel Endpoint – Manual Configuration” on 

page 5-160

. 

Figure 5-61. 

Model 5212/5224/5330/5340 IP Endpoint Connections

(Optional) To PC (LAN cable)

(Optional) To headset

To handset

 LAN-powered jack OR Supplied 48 VDC

Endpoint base unit

Endpoint bottom

Applicable to 5224 endpoints only (see 

step 5

)

power adapter (part number: 50005301)

Summary of Contents for Inter-Tel 5000





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands