manualshive.com logo in svg

Mitel Inter-Tel 5000, Installation And Maintenance Manual

Share
Download
Mitel Inter-Tel 5000 Installation And Maintenance Manual Download Page 448

Appendix C: Open Source License Agreements
Embedded Configurable Operating System

Page C-16

Inter-Tel

® 

5000 Installation Manual – Issue 2.4, May 2008 

Embedded Configurable Operating System

Part of the software embedded in this product is eCos—Embedded Configurable Operating 
System—a trademark of Red Hat. Portions created by Red Hat are Copyright (C) 1998, 1999, 
2000 Red Hat, Inc. (http://www.redhat.com/). All Rights Reserved.

THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY RED HAT AND ANY 
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, 
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGE.

SoX

SoX is distributed under the GNU GPL and GNU LGPL. To be precise: the sox program is 
distributed under the GPL, while the library libsox, in which most of SoX’s functionality resides, 
is dual-licensed. Note that some optional components of libsox are GPL only: if you use these, 
you must use libsox under the GPL.

Send bug fixes, enhancements and feature requests to [email protected], or post 
them to the relevant tracker at http://sourceforge.net/projects/sox/.

SoX is distributed with man pages, with plain text versions for those on systems without man. 
The majority of SoX features and source code are contributed by users.

Requests for Source Code

Inter-Tel shall provide snippets of the modified source code to anyone requesting it for the 
licenses identified in paragraph  on 

page C-2

. To obtain the source code of third-party 

components licensed under the GNU General Public License or Lesser General Public License, 
email 

[email protected]

. 

Summary of Contents for Inter-Tel 5000





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands