manualshive.com logo in svg

Mitel Inter-Tel 5000, Installation And Maintenance Manual

Share
Download
Mitel Inter-Tel 5000 Installation And Maintenance Manual Download Page 209

Chapter 5: Installation

Powering Up the System

Inter-Tel

® 

5000 Installation Manual – Issue 2.4, May 2008

Page 5-87

MAINTENANCE TASKS

The following sections provide procedures for performing tasks that are required multiple times 
when installing, upgrading, or servicing an Inter-Tel 5000 platform.

Powering Up the System

To power up the system:

1. 

Make sure all chassis modules are installed and fastened to the chassis.

2. 

Make sure the chassis is properly grounded and check all connections for loose, 
cracked, or broken components.

3. 

Make sure all cabling is securely attached to the modules, or any other components, at 
the back of the chassis. At times, cables can loosen and drop a connection.

4. 

Make sure the compact flash-type Inter-Tel memory card and USB security key are 
installed.

5. 

Plug in the chassis power cord into the UPS device. Plug in the UPS power cord. The 
system boots and is ready to begin initial configuration and programming. 

6. 

If this is an upgrade, do the following:

a. Perform a database backup. 

b. Start the Administrator Web Session interface and upgrade the system software. 

7. 

Install the current DB Programming version.

a. Upload the current license file, as applicable to your site.

b. Disable Basic Voice Mail in DB Programming before plugging-in an external voice 

processing system. From the DB Studio menu bar, select Operations – Voice 
Processing Operations – 

Disable Basic Voice Mail

.

NOTICES

Do 

not

 plug in the UPS power cord unless you are ready to boot the system. There is no 

power-on switch on the Base Server chassis. Plugging in the power cord begins the boot 
process. Please read the following NOTICE. If power to the system fails (prevented by using 
a UPS), then comes back, the system boots automatically. Under normal circumstances, as 
long as the power cord is plugged into the chassis, the system is up and running. If the 
system is shut down (and plugged in) using the LCD panel, 

use the center button next to the 

LCD panel to power up the system

. 

Possible Memory Card Corruption

: By adhering to the following precautions you can help 

prevent corruption of data on the Inter-Tel memory card:

•

Do 

not

 remove or install the Inter-Tel memory card while the system is up and running 

or power is otherwise supplied to the Inter-Tel 5000 Base Server, as this may damage 
the memory card. Shut down the system using the LCD panel and unplug the power 
cord before removing or inserting the memory card. 

•

Using any compact flash-type memory card other than one provided by Inter-Tel is 

not

 

supported.

•

Do 

not

 place the Inter-Tel memory card into any other PC. Doing so may corrupt the file 

system and software. 

Summary of Contents for Inter-Tel 5000





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands