Mitel Inter-Tel 5000, Installation And Maintenance Manual

Page: 108 / 468

Chapter 4: Specifications
Endpoint LED Flash Rates
Page 4-46
Inter-Tel
®
5000 Installation Manual – Issue 2.4, May 2008
1. For transfers, the IC or CALL button LED goes out when the user hangs up.
2. Requires a programmable button.
SPEAKER
Speakerphone is
on or ready for
use. Or, endpoint
programming is
in progress.
SPEED DIAL
2
Designated
endpoint is busy
or unplugged. Designated
endpoint is in
DND. Designated
endpoint has a
call ringing in. Continuous flutter
indicates that the
designated
endpoint was left
off hook.
TRUNK
Trunk is in use at
another endpoint,
in a conference
at your endpoint,
or it is unplugged. Trunk is in use at
your endpoint. Trunk is recalling
from hold or
transfer. Trunk is ringing
in, camped on
(waiting), or in
busy trunk
callback queue to
your endpoint. Trunk is on hold.
Table 4-25. Multi-Protocol Endpoint LED Flash Rates, ITP Mode (Continued)
Steady
0 IPM
Slow
30 IPM
Medium
120 IPM Fast
240 IPM
Flutter
60/960 IPM
Table 4-26. Multi-Protocol Endpoint LED Flash Rates, SIP Mode
Steady
0 IPM
Slow
30 IPM
Medium
120 IPM Fast
240 IPM
Flutter
60/960 IPM
ANSWER
Models
8620 and 8662:
Intercom, recall,
conference,
camped on, or
transferred call is
ringing-in.
CNF
The LED flashes
for 2–5 seconds
and then go out
when the
conference is
established. A conference party
is on conference
wait hold.
DND
Endpoint is in Do-
Not-Disturb.
FWD
All calls are being
forwarded.
MSG
Endpoint is in
alphanumeric
mode. Message is
waiting.
MUTE
Microphone is
muted.
SPEAKER
Speakerphone is
on or ready for
use. Or, endpoint
programming is in
progress. Model 8600:
Intercom, recall,
conference,
camped on, or
transferred call is
ringing-in.