Mitel Inter-Tel 5000 Installation And Maintenance Manual Download Page 326

Page: 326 / 468

Chapter 6: Reference
Inter-Tel Memory Cards

Page 6-4

Inter-Tel

5000 Installation Manual – Issue 2.4, May 2008

Inter-Tel Memory Cards

Table 6-3

identifies the compact flash-type memory cards available for use in Inter-Tel 5000

platforms.

Replacement Parts

Table 6-4

identifies the system equipment and parts available for Inter-Tel 5000 platforms.

Table 6-3.

Compact Flash-Type Inter-Tel Memory Cards

Description

Part No.

[Europe]

Inter-Tel Memory Card with Software, 1024 MB

841.0273 [841.0277]

Inter-Tel Memory Card with Software, 512 MB

841.0274 [841.0278]

Inter-Tel Memory Card with Software, 256 MB (U.S. systems only)

841.0275 [841.0279]

Table 6-4.

Replacement Parts

Description

Part No.

[Europe]

Chassis Units and Processor Expansion Card

Inter-Tel 5000 Base Server Includes:

•

Inter-Tel CS-5200/5400 Base System Chassis (580.1000)

•

Processor Module 1 (PM-1) (580.2000)

•

Inter-Tel 5000 Compact Flash Card 512 MB (841.0274)[841.0278]

•

Inter-Tel CS-5200 License Base (840.0238)

•

Inter-Tel 5000 v2.2 software (840.0726)

•

Inter-Tel 5000 v2.2 CD-ROM (841.0658)

•

Inter-Tel 5000 Software License Key (841.0219)

•

Inter-Tel 5000 Enabler License 99 Nodes (840.0459)

•

Software Site License (999.9000)

•

4 ports of Basic Voice Mail included

580.9049

Processor Module (PM-1)

580.2000

Processor Expansion Card (PEC-1)

580.2020

Processing Server Chassis for CS-5600 (PS-1), Rackmount

Includes 16-Port Basic Voice Mail.

580.5600

Digital Expansion Interface (DEI) – See Table 6-8 on

page 6-8

Miscellaneous Equipment

5-Button Keypad, PCBA

580.2600

Mounting Brackets for Inter-Tel 5000 base chassis (pair)

823.1416

Mounting Brackets for Inter-Tel 5000 base chassis (pair)

823.1392

Null Modem with Hardware Flow Control for Processing Server (PS-1)

804.2605

Summary of Contents for Inter-Tel 5000





















































































































































































































































































































































































































































































Search results

Summary of Contents for Inter-Tel 5000

Reviews:

Brands by name

Popular brands

Mitel Inter-Tel 5000, Installation And Maintenance Manual

Search results

Summary of Contents for Inter-Tel 5000

Reviews:

Brands by name

Popular brands