manualshive.com logo in svg

Mitel Inter-Tel 5000, Installation And Maintenance Manual

Share
Download
Mitel Inter-Tel 5000 Installation And Maintenance Manual Download Page 295

Chapter 5: Installation

Review and Update for Enabling a Voice Processor

Inter-Tel

® 

5000 Installation Manual – Issue 2.4, May 2008

Page 5-173

3. 

Install the external voice processing PC in the rack under the Inter-Tel CS-5200/5400/
5600 Base Server. If the voice processing PC cannot be placed in the rack, place it in 
the appropriate proximity to the rack. The distance is limited by the connection cable 
provided. As necessary, follow the instructions included with the voice processing PC 
you purchased. 

4. 

Attach the Ethernet cables from both chassis to the LAN, as shown in Figure 5-65 on 

page 5-174

. Use a switch if necessary; do not use a hub. 

5. 

Attach the cable, part no. 813.1806, from the external voice processing PC to the Inter-
Tel CS-5200/5400/5600 Base Server.

6. 

Program the external voice processing system to connect to the Inter-Tel CS-5200/5400/
5600 Base Server. For details, see the external voice processing system manual. 

7. 

Use the Administrative Web Session (AWS) pages to verify that Basic Voice Mail (BVM) 
is disabled. The AWS default login is 

it5k

, and the default password is 

itpassw

. 

Review and Update for Enabling a Voice Processor

Inter-Tel 5000 platforms support any of the following voice processors: Basic Voice Mail (BVM), 
Enterprise Messaging (EM), or a Voice Processing Unit (VPU). And, for proper configuration, 
DB Programming requires that the voice processor type is identified. Once the VP is physically 
connected, the system senses which type it is.

As with previous versions, a voice processor connected to an Inter-Tel 5000 platform auto-
enables when the system boots up. To avoid the risk of overwriting an established database 
with default values, Inter-Tel recommends connecting the voice processor first, then connecting 
with a remote mode session of DB Programming, and then saving.

To save a voice processor database in remote mode:

1. 

Connect the PS-1, EM, or VPU equipment to the system in accordance with Inter-Tel 
installation instructions. Refer to the applicable installation manual.

2. 

In remote mode, launch Session Manager and start a DB Programming session.

3. 

From the DB Studio menu, select Operations – Database Operations – 

Database Save

. 

Identify the location where you want to store the system database, then select 

Save 

Voice Data to:

 box and identify the location where you want to save the voice processor 

database.

4. Click 

Start

. System and voice processor databases are saved to the locations indicated.

NOTICE

External Voice Mail Inoperability

. If you have an existing external voice processing 

system (VPU or EM), you cannot use the existing cable to connect the external voice 
processing system to the Inter-Tel 5000 platform. You must use cable part no. 
813.1806. 

Summary of Contents for Inter-Tel 5000





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands