97
⑬Stop Type（Motor Stop Setting）
Set up each axis Motor Stop Setting
When select the
“
Stop Type
”
, to be Motor Stop setting screen. Display the cursor on left lateral of
setting axis.
Move cursor to the left-lateral of axis that set with ↑,↓ key.
※Return to parameter selection screen with ESC key。
After axis selected, press Enter key, display the cursor on left-lateral of setting data, and then input
the setting data with ↑、↓key
After setting finished, press Enter key, be moved the cursor on left-lateral of axis and input any other
axis.
※During input the setting data, press ESC key, might be return to select the setting axis without
input setteing data.
⑭Zero Reset（Count Zero Reset Setting at Origin Return）
Set up each axis Count Zero Reset Setting
When select the
“
Zero Reset
”
, to be Count Zero Reset setting screen. Display the cursor on left
lateral of setting axis.
Move cursor to the left-lateral of axis that set with ↑,↓ key
※Return to parameter selection screen with ESC key.
After axis selected, press Enter key, display the cursor on left-lateral of setting data, and then input
the setting data with ↑、↓key.
After setting finished, press Enter key, be moved the cursor on left-lateral of axis and input any other
axis.
※During input the setting data, press ESC key, might be return to select the setting axis without
input setteing data.
S T X F a s t - S t o p
Y S l o w - S t o p
Parametor
Axis
Setting data
Cursol position for selected axis
Cursol position for input data
Z R X Y e s
Y N o
Parametor
Axis
Setting data
Cursol position for selected axis
Cursol potion for input data
Summary of Contents for DS102MS
Page 166: ...166...
