92
Move cursor to the side of setting item that want to be set with ↑、↓key.
Shows
“
distance per 1pulse (RE) and
“
Set up drivers division number (DR)
”
when press ↓key
for 2 times.
* RE
（Distance per 1 pulse at the full step）÷（Division number of driver）
Automatically calculated
Press Enterkey when move the cursor to setting item that want to be setting. Then, carsor move to
left-lateral of setting data that selected, available to input the setting data.
※Press ESC key at the setting item select screen, return to axis selecting screen.
※Press ESC key at the setting data input screen, return to setting item select screen.
＜UN＞
Set the units
Press ↑、↓ key, then select (p(pulse)/u(um)/m(mm)/d(deg)/r(mrad))
Press Enter key after finished input, return to setting item select screen.
＜SD＞
Set up the distance per 1 pulse at the full step of motorized stage.
Input setting data with numeric keypad.
After input finished, press Enter key, return to setting item select screen.
＜DR＞
Set up the division number of motorized driver with ↑、↓ key.
Normal driver → FULL／HALF
Micro step driver → １／１～１／２５０
※If press ESC key during input the setting data, return to selection screen of setting item without
setting data.(In case of ST entry screen, (Return to selection screen of setting item with
ESC key continuation press（1 sec）
）
⑤Software Limit（Set up Software Limit）
Set up valid/invalid and set the coodinate of software limit.
When select the
“
Software Limit
”
, display the cursor on left-lateral at the selection screen that
setted software limit. Press ↑,↓ key, select the setting axis.
Return to parameter selection screen with ESC key.
Press Enter key after finished selection of axis. Move to Software Limit setting screen of +(CW) side of
selection axis, then cursor shows on left-lateral
X D R 1 / 2
R E 0 . 0 0 0 5
Setting axis
Carsor
Setting data
Item
S L X - a x i s
Y - a x i s
Parametor
Selection axis
Cursor
Summary of Contents for DS102MS
Page 166: ...166...
