MISUMI DS102MS, Operation Manual

Page: 152 / 166

152
＜Ex.: Response Data＞
SURUGA, DS102, 0, VER1.00
※In case of DS112, “ DS102 ” is returned too.
4.3.5.12 General I/O Command
（1） IN00？～IN47？
Status Request Command for General I/O Request 1/bit
＜Response Data＞ Content
０ Input OFF
１ Input ON
（2） INP0？～INP2？
Status Request Command for General Input. Request Input 16points of each controller(LinkID０～2)
all at once.
＜Response Data＞ is 0～65535.
＜Response Data＞
Contents
０ All of 16 points OFF
65535 All of 16 points ON
（3） OUT□＿＜Data＞
Control Command of General Output.（0～35） Set 1/bit
□：00～35.
＜Setting Data＞ Content
０ Output OFF
1 Output ON
（4） OUTP□＿＜Data＞
Control Command of General Output. Request Output 12points of each controller (LinkID０～2)all at
once.
□：0～2、＜Response Data＞ is 0～4095.
＜Response Data＞
Content
０ All of 12 points output OFF
4095 All of 12 points output ON
（5） OUTP0？～OUTP2？
Status Request Command for General Output. Request Output 12points of each controller (LinkID
０～2) all at once.
＜Response Data＞ is 0～4095.
＜Response Data＞ Content
０ All of 12 points during output OFF
4095 All of 12 points during output ON