MISUMI DS102MS, Operation Manual, Page: 13 / 166

１３
DS102
Stepping Motor
Controller
X axis stage Y axis stage
AC100V
AC100
～240V
USB Cable：
DS100-USB-1.8
USB RS232C
RS232C Cable：
D100-R9-2
or
X Y
Motor Cable
16 pins series stages：
D214-1-□E，D214-1-□R
（MISUMI：SRCB□，SRCB□-R）
12 pins series stages：
D214-2-□E，D214-2-□R
（MISUMI：MSCB□，MSCB□-R）
D214-2-□EA，D214-2-□RA
（MISUMI：MS4CB□，MS4CB□-R）
Attached
Power Cable
① Connect X axis motor connector to X axis stage.
② Connect Y axis motor connector to Y axis stage.
③ Connect AC inlet and AC100～240V.
④ Connect USB connector to USB port of PC.
(Connect RS232C connector to PC if use RS232C)